Linkistä löytyy uuden X3 Sabren manuaali, kattavat ohjeet kasauksesta hyvillä kuvilla ja selostuksilla kuten TWF8 porukalta on totuttu näkemään. Linkin tiedot päivittyvät varmasti jossain vaiheessa paino ym. tiedoilla kuten yleensä on ollut muissakin autoissa ja malleissa.
http://www.twf8.ws/new/tech/car/hongnor/x3sabre/x3sabrebuild/x3sabre-index.html (http://www.twf8.ws/new/tech/car/hongnor/x3sabre/x3sabrebuild/x3sabre-index.html)
Linkin kitistä poiketen, jotkin kaupat myyvät pakettia ilman pilliä ja renkaita (saattaa olla muitakin ns. puutteita riippuen kaupasta).
Rc-navettassa on nyt X3 tarjouksessa. http://rc-navetta.fi/product_info.php?cPath=22_35&products_id=30 (http://rc-navetta.fi/product_info.php?cPath=22_35&products_id=30) Auto kitin mukana tulee renkaat ja EFRA hyväksytty pilli joita esim. Englannista tilatessa ei saa (taitaa olla harvinaisia muillakin automerkeillä). Hinta on aikalailla sama Suomessa kuin Englannissakin eli yllättäen kannattavampaa onkin ostaa auto Suomesta kuin ulkomailta.
Onkohan kenelläkään vielä kokemuksia uudesta honkkarista?
Onko tämä merkki vielä RC Garagen edustama?
Eipä tuota Rc-garagea näy edes tämän sivun mainostajissa eli ei taida enää mitään toimittaakkaan. Kovin kallista ei varmaan kuitenkaan ole kysyä puhelimella mikäli yhteystiedot löytyy.
Kappas vaan no eipä näy enää. En ollut kiinnittänyt huomiota asiaan. Ei ole tarvista soittaa.
Garagen ovet on pistetty säppiin ja tietääkseni juuri RC-navetta on ostanut Janilta oikeudet ja loput sälät ja jatkaa toimintaa. Tällaisessa käsityksessä itse olen, korjatkoon joku jos tietää paremmin.
Juu rc-navetta myy honkkaria,pisti tossa silmään että hyvin kulkee maailmalla uusi X3 sabre.
Auton kasauksesta 4 sivun juttu ranskaksi selkeillä kuvilla.
http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&t=45325&postdays=0&postorder=asc&start=0 (http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&t=45325&postdays=0&postorder=asc&start=0)
Set-up listaa
http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&t=45396 (http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&t=45396)
Vaikean näköisesti pitänyt tehdä tuo diffin pinjonilaakeri systeemi, kun tuollaiseen muoviholkkiin tulevat.
Tuo uusi jarrutusmekanismi on vähän turhan eksoottisen näköinen, saa nähdä miten tuosta saa tehtyä harjattoman konversion fiksusti.. Toivottavasti edes toimiva. Muuten oikein lupaavan näköistä mutta noi radioboksit jne vie vähän turhan paljon tilaa ja on ruman näköiset, tämä on tosin vain oma mielipiteeni... Enkä näe autossa hiilikuitua, blingiä pitää olla :angry: Toivottavasti kuitenkin on yhtä laadukas ja kestävä kuin X2 sarjan buggy ja truggy.
HongNorin autot on kyllä aina olleet laadukkaita, yksi parhaita automerkkejä kokonaisuudessaan mielestäni. Kestäviä, laadukkaita ja hinnat ovat varsin kohtuulliset. En keksi mitään valitettavaa.
HongNorin metalliset (HD Metal) diffin rattaat, shimmejä on 4kpl alumiinisten rattaiden kanssa niitä on 8kpl.
*EDIT*
Painoerot:
Alumiiniset rattaat: 13.7g
Metalliset rattaat: 15.4g (oma mittaus 15.0g)
Eroa 1.7g eli kaikkiin diffeihin lisäystä vain 5.1g mutta kestävyyttä lisää.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi5.aijaa.com%2Fb%2F00228%2F9980505.jpg&hash=e5c9a514961d38025ceaffaec804bfbd1833b6f3) (http://aijaa.com/002289980505)
TWF8 optio listaa:
http://www.twf8.ws/new/tech/car/hongnor/x3sabre/x3sabrebuild/x3sabre-options.html (http://www.twf8.ws/new/tech/car/hongnor/x3sabre/x3sabrebuild/x3sabre-options.html)
Muita optio-osia:
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi5.aijaa.com%2Fb%2F00337%2F9993087.jpg&hash=fc4e1060fc246cff93f7168b5be614e87874f9f8) (http://aijaa.com/003379993087)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi10.aijaa.com%2Fb%2F00972%2F9993096.jpg&hash=ada13ed7b309bfbb3803af9599e0063222bfb3a9) (http://aijaa.com/009729993096)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi2.aijaa.com%2Fb%2F00423%2F9993099.jpg&hash=118ad096e9e7fdde49dc10a17d1c7012d5305a94) (http://aijaa.com/004239993099)
T-Wrok's osia:
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi4.aijaa.com%2Fb%2F00120%2F9993121.jpg&hash=ef7fbfb9045167e755313f47965301719f20d621) (http://aijaa.com/001209993121)
Jotain muutakin HN osaa on vielä tuloillaan.
No niin, X3 saapui tännekin jumalan selän taakse. :grin: Muutoksia mitä huomasin Hong Norin tehneen ensimmäisiin sarjoihin verrattuna on ainakin metalliset diffin rattaat vakiona ja ilmanputsarin pidike on vaihtunut muovisesta metalliseen. :smiley:
X3 sähköversiokin on nyt julkaistu:
http://www.hongnor-racing.com/pdt_view_cars.asp?sn=1007 (http://www.hongnor-racing.com/pdt_view_cars.asp?sn=1007)
http://rc10.fi/index.php?topic=66677.0 (http://rc10.fi/index.php?topic=66677.0)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi11.aijaa.com%2Fb%2F00436%2F10270061.jpg&hash=de829701218d36eaf01a570527dd6ab6dd7efd7d) (http://aijaa.com/0043610270061)
Noniin, auto on ollut jonkun aikaa kasattuna mutta vasta nyt saan aikaiseksi laittaa tännekin jotain.
Auton kasaamisessa ei ollut ongelmia. Ruuvien reiät kävivät just eikä melkein ja osat istuivat tosi hyvin paikoilleen. En löytänyt moitittavaa.
Kitin mukana tuli kaksi iskarin jousisarjaa, kahdet kallistuksen vakaajat (2.3 ja 2.5), Alumiiniset ja komposiitti runkojäykkärit, EFRA hyväksytty pilli + alkukäyrä, vanteet ja renkaat. Eli tälläiselle perusharrastajalle ihan mukavasti säätövariaatioita jo pelkän kitin mukana ilman että heti tarvitsee lähteä hankkimaan optio/hopup osia. Kytkinkin kaikkine osineen kytkinkellon shimmejä myöten. Periaatteessa lisäksi ei tarvitse muuta kuin moottorin ja sähköt.
Kasaamisen helppouden ilmaisee parhaiten Ace Ventura :laugh:
Ace Ventura Like a glove Scene (http://www.youtube.com/watch?v=DG-7e943srs#)
Konversio kitin manuaali, suora linkki lataukseen -> www.hongnor-racing.com/program/files3/download.asp?sn=495 (http://www.hongnor-racing.com/program/files3/download.asp?sn=495)
Pari uutta T-Works optio osaa:
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi10.aijaa.com%2Fb%2F00921%2F10515558.jpg&hash=c1ad19eb6c7a96fb6843b7ad67de0d117a5842ca) (http://aijaa.com/0092110515558)
Hard Coated Alum. F/R Axle Shaft TO-095 (noin 15-16g kevyempi)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi1.aijaa.com%2Fb%2F00491%2F10515579.jpg&hash=166eac0dff64231e53ba79ae3552e8c282f7adc1) (http://aijaa.com/0049110515579)
Hard Coated Alum. Joint Cups TO-099 (noin 11g kevyempi)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi10.aijaa.com%2Fb%2F00685%2F10515585.jpg&hash=c7aa46ae94fe560d76ef74e53c1b621bfcc51f68) (http://aijaa.com/0068510515585)
Hard Coated Alum. Joint Cups TO-100 (kevennys ???)
Pari uutta Optiman osaa.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FOptima%2FPOX01%25201200.jpg&hash=14fd7823861073fe698ab2654f9749cc95cb69a2)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FOptima%2FPOX02%25201200.jpg&hash=16066541bf6280306c0ad8db4b285304d637508d)
Diffikotelon tuet eivät ehkä enää ole ajankohtaisia. Ensimmäisissä kiteissä oli jotain ongelmaa kestävyyden suhteen mutta Hong Nor on muuttanut muoviseosta eikä ongelmia pitäisi enää ilmetä.
T-Worksilta kaksiosainen moottoripukki ja ackerman setti
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi10.aijaa.com%2Fb%2F00547%2F10711171.jpg&hash=787fccb99918da2cc9d2c672d6fd08919cedf764) (http://aijaa.com/0054710711171)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi6.aijaa.com%2Fb%2F00604%2F10711173.jpg&hash=25ba71ea62f317fad19981cfbb9fd78186f12524) (http://aijaa.com/0060410711173)
7075-T6 Quick Change Engine Mount TO-105
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi1.aijaa.com%2Fb%2F00108%2F10711183.jpg&hash=aff18365b0d7fd1a54a56acc108b3cfe4baeafdc) (http://aijaa.com/0010810711183)
7075-T6 3.5mm Steering Ackerman Plate Set TO-106
Jatketaanpas täällä yksinpuhelua, elikäs Nicolas Rodriquezin haastattelu (Ranskaksi).
Coupe de France - Viglain 2012 - Interview - Nicolas Rodriguez (http://www.youtube.com/watch?v=JnJyY_5nQjU#ws)
...Ja aika-ajo pätkää.
CF Elite manche 4, à Noeux le mines, 23 et 24 juin - Qualification 4x4 - Nicolas Rodriguez (http://www.youtube.com/watch?v=uQwgP6S5ZGM#ws)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi1.aijaa.com%2Fb%2F00950%2F11145017.jpg&hash=cb7b2c73ba372eb745553485ec9a017b63be409e)
X3S-21 Aluminium Rear Skid Plate
HongNorilta tulossa kohta päivitysosa joka jo testattu ja menossa tuotantoon/tuotannossa.
T-Works ja T-Bone Racing, aiemmin julkaistuja osia.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi3.aijaa.com%2Fb%2F00328%2F11144832.jpg&hash=0278b9b2cd4654423889683975c9d9a8f8bd4f9e)
Aluminum Wing Mount Post 3 pcs. TO-089
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi2.aijaa.com%2Fb%2F00431%2F11144839.jpg&hash=adbb72f543eebbf2a8abc04446e1f8e6cacd11fe)
B105-TBR DSF front skid - 23002
B203-TBR DSr rear skid - 23004
B304-TBR DSS front skid & rear skid set - 23006
T-Bone Racing julkaissut myös X3 Sabrelle leveitä ns. bashaus puskureita.
C101-TBR Basher front bumper - 23000
C201-TBR rear bumper - 23003
C208-TBR Wide Basher rear bumper
Mulla oli t-bonen osia infernossa, ihan ok kamaa
Kreikkalaisen Adrenalini tv:n pätkä rc-autoilusta, eli ei pelkästään honkkari video vaikka Sabre useasti kuvissa näkyykin.
http://www.youtube.com/watch?v=7ZxvZM_fQ14&feature=player_embedded#! (http://www.youtube.com/watch?v=7ZxvZM_fQ14&feature=player_embedded#!)
...Ja pikku pätkä Martin Wolhuterin ajoa männä kesältä.
X3 Sabre - Martin Wolhuter (http://www.youtube.com/watch?v=Pnx4miJkCwg#ws)
Hong Norin Yeh Hsia Ching voitti Manufacturers Cupin. Alla linkki 45 minuutin A-finaalin.
http://www.asiarc.info/thread-1851-1-1.html (http://www.asiarc.info/thread-1851-1-1.html)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.james-racing.com%2Fgct_admin%2Feditor_files%2F20121031103330.jpg&hash=ed960da6807500f0ab205f8b39b166a6c8e019c9)
on se kova!
Martin Wolhuterille kirittäjä Australian sarjaan.
Jarred King joins HongNor
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.buggy-sport.info%2Findex.php%2Fgallery%2Fimage%3Fview%3Dimage%26amp%3Bformat%3Draw%26amp%3Btype%3Dimg%26amp%3Bid%3D4542&hash=d170b23313ba3fd56a1a4c8bc20bef0022933809)
Written by Martin Wolhuter
Hong nor would like to welcome Jarred King to the team. He brings with him a wealth of knowledge in electric and gas off road. His first major race will be in January with some club days done before then. He has done some testing with the X 3 saber and first time out with it was doing same lap times as with his previous car. He looks forward to really testing and developing the car.
Welcome to the team.
T-Works
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi7.aijaa.com%2Fb%2F00267%2F11272566.jpg&hash=19cc6224750c3666f9ec213452a74955c558789e)
Hong Nor X3/X3E Sabre Alum. Ball Set TO-104 (18g kevyemmät)
T-Bone Racing puskuri, jollaista tiedustelin jo aikaa sitten.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Ft-bone-racing.net%2Fimages%2Fproducts%2F17987.JPG&hash=f80988ad69c2aa875d0bbb0baf88193a17ff01f9)
C104-TBR Pro front bumper - 23001
HongNor päivitys (Kuvassa alempana), osanumero pysyy samana X3S-09.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.rctech.net%2Fforum%2Fmembers%2Fbuggyman5-albums-hn-x3-picture6338-rr.jpg&hash=e5e6b261e03f62ecd44592aab63cfc811b78fd75)
Myös Optima julkaissut oman päivityksen.
"One of the few parts that may be broken on the X3 Sabre, the rear toe-In plate is now available in our OPTIMA option parts range. Like numberous OPTIMA items, it is life guaranteed too...!!"
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FPHOTOS%2FOPTIMA%2FPOX03%25201200.jpg&hash=1b3b1b0f9595a66f0efe91b8aa4d87a64c3a7527)
RCmag:n edellistä enemmän vaivaa nähtyyn juttuun kasauksesta aika tarkoilla kuvilla. Päivittäin ilmestyy muutamia kuvia. Tässä vaiheessa aihetta 4 sivun verran.
http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&t=50470&postdays=0&postorder=asc&start=0 (http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&t=50470&postdays=0&postorder=asc&start=0)
HNMC Winter round 5 Written by James R.S. Thompson
With wet weather this round would be on the astro track.
TQ was fought out by Callum Niblett and Bart Banach with young Callum taking it after great success in the worlds last week.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.buggy-sport.info%2Findex.php%2Fgallery%2Fimage%3Fview%3Dimage%26amp%3Bformat%3Draw%26amp%3Btype%3Dimg%26amp%3Bid%3D4947&hash=f62f9b11609dfe101e6a2e11ede275c337f249f1)
1st Callum Niblett
2nd Gary Brace
3rd Bart Banach
-------------------------------------------------------------
"Worldsit" alkoivat Niblettiltä kohtalaisesti ja oli siinä 60 sijan kieppeillä mutta finaaleja kohti sijoitus hieman tippui. Ehkä kuitenkin ihan ok suoritus 12-vuotiaalta.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fgallery.neobuggy.net%2F2012Races-1%2FWorlds%2FSaturday-1st%2Fi-sWC9tp9%2F0%2FL%2FEUR_9846-L.jpg&hash=2004cbf74b6c4e887b46262d80282068cff0e12b)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fgallery.neobuggy.net%2F2012Races-1%2FWorlds%2FSaturday-1st%2Fi-dWTWHqF%2F0%2FL%2FEUR_9959-L.jpg&hash=8f539c2c18db44800394c0ecf03b778604e6d397)
Kauden avaus Taiwanin maalla
HongNor team driver Cheng Yi Yuan won TQ and A1 in the first National Championship in Taiwan on 01/06/2013 with his X3-Sabre. Also, team manager Yeh Hsia Ching received B main 1st position. Congratulations to both of them!
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/16797_501439869895596_1213365135_n.jpg)
HNMC Winter round 2 re run
Niblett starttasi finaaliin viidentenä mutta nousi lopulta kolmanneksi.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.buggy-sport.info%2Findex.php%2Fgallery%2Fimage%3Fview%3Dimage%26amp%3Bformat%3Draw%26amp%3Btype%3Dimg%26amp%3Bid%3D5260&hash=82af90dba326aabdf75acee23c2b14618b10a027)
1st Simon Reeves
2nd Kevin Brunsden
3rd Callum Niblett
X3S-22 CNC Aluminum Pinion Gear Mount
HongNor has released a new optional part for X3-Sabre off-road buggy.
The new X3S-22 pinion gear mount is CNC machined from high-grade 7075-T6 aluminum.
This X3S-22 comes with 5x13x4 ball-bearing in front and 5x11x4 ball-bearing in rear for extra durability
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fnews%2Fpics%2Fbig_2013116317224.jpg&hash=ad8cf4dca3fce2d76a710c8b9836edbe34d1da2e)
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn1/67986_515448145161435_299661320_n.jpg)
Hong Nor X3 Sabre 2.0
Hong Nor has released the brand new X3 Sabre 2.0 version for 2013. The X3 Sabre 2.0 not only has improved plastic material but also comes with many optional parts to enhance its performance and durability.
New Features include:
1. Thicker and more durable Front Bumper to decrease crash damage.
2. Newly designed Gear Box to add strength and durability.
3. New Diff Case to eliminate oil leakage.
4. Thicker front Lower Arms to decrease crash damage.
5. CNC machined aluminum Pinion Gear mount for front and rear.
6. CNC machined aluminum rear Chassis Brace Mount.
7. Newly designed Rear Lower Arm Toe-in Plate.
8. CNC machined aluminum Rear Chassis Skid Plate.
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/483892_515113235194926_1717210868_n.jpg)
Lisätään tähän vielä TWF8 linkki aiheesta http://www.twf8.ws/new/tech/car/hongnor/x3sabre2.0/x3sabre-2.0.html (http://www.twf8.ws/new/tech/car/hongnor/x3sabre2.0/x3sabre-2.0.html)
Onkohan honkkarilta tulos uutta trukiikin :tongue:
_magu_ On kuulemma tulossa X3 truggy mut aikatauluista ei ole mitään tietoa vielä.
Jarno
X3 Sabre Wins at Winternational Reported by Chad Grana
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.ofna.com%2Fnews%2Fdata%2Fupimages%2FChad_Grana_Winternationals_win.jpg&hash=3f09251a6fefe45ba003dec1b6bbd5fe0518662b)
I had to wait an extra week to try out my new OFNA X3 SABRE as the race got rained out last Saturday on the 26th for Revelation Raceway's Winter-nationals but the wait was worth it. There was a good turnout of over 100 racers and a lot of very fast guys on a fast track. My first round of qualifying didn't go so well as I made mistakes and it kept me from getting in the A-main. The second round of qualifying was much better as I was able to get some clean track that got me in the A-final.The Main would be a long wait but I was ready and my X3 felt pretty good, I got a real clean start as I hugged the inside rail on the first turn to stay out of trouble and was able to move up a few positions after the corner. Me and the other top 5 drivers started to distance ourselves from the rest of the field. I was able to get around Fred Steel for the fourth spot and started closing in on the third spot. Eddie Ayala running second and wadded up the car and broke, that put me into the third spot now closing for the next position. The car was handling amazing as I brought the car in for my first pit stop. Lorenzo Rojas running in the second spot flamed out leaving the pits putting me into the second spot and I quickly passed Steve Harris moving into the top position. I had a half a lap on the field when I started to run into some lap traffic. With the cars handling ability I was able to negotiate around most of the cars with ease. After my second and last pit stop I started to make a few mistakes and got tangled up with a few lap cars bringing my lead down to only eight seconds. I was able to compose myself and start pulling away again and ended up taking the win. With having this car less than a month and this being the first race of the year I couldn't of asked for anything more. I want to thank OFNA for giving me this opportunity to run for them in the 2013 year.
------------------------------------------------------------------------------------------------------------------------------------
HNMC Winter 7 Written by James R.S. Thompson
The seventh round of the HNMC Winter series took place at the HNMC's Astro turf track rather than the dirt track due to very bad weather. Qualifying was dominated by Tony Truman but he had bad luck with water in a switch in the main final, this allowed Gary Brace to take a good win from Callum Niblett and Bart Banach 3rd.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.redrc.net%2Fwp-content%2Fuploads%2F2013%2F02%2FHNMCWinterSeriesRd7Buggy.jpg&hash=13aca07d09f3613ebfd99d07e7fde75210aa04aa)
Niblett starttasi kisaan viidentenä ja jäi lopulta vain 1.53 sekuntia voittajasta.
1st Gary Brace
2nd Callum Niblett
3rd Bart Banach
Titaani vantit + avain X3S-18 Paino tippuu 15g.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi3.aijaa.com%2Fb%2F00356%2F11835825.jpg&hash=2a6b9d7e37b05fdf3394464e1ee1e97505fa7bed)
T-Worksin ns. itse lukittuvat pyöränmutterit (HongNor, Hobao) TO-051BR
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi2.aijaa.com%2Fb%2F00211%2F11835846.jpg&hash=83f6c1c0744e4f8ba6b24b6bc2ed71af0e3ce316)
A win for Mario Netto driving his X3 Sabre Reported by Mario Netto
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.ofna.com%2Fnews%2Fdata%2Fupimages%2Fmarioclubwin.jpg&hash=ae53af0d556ac99aeb7abb328de62cd3fa13b5f9)
After a nice little break from racing since Nitro Challenge and a rained out Grass Roots race, DJ and I decided to go to Revelation Raceway for some friendly club racing. The turn out was good, the track is a fresh new layout and the weather was great. As soon as I drove my first few practice laps, I knew my buggy was good. I qualified 3rd and didn't change a thing on my car except for tires for the main, I switched over from my VP-Pro Turbo Trax to my Strikers which were dialed. I got a rough start, tangling up with the pack, but was able to make my way through the traffic within the first few laps. I was actually racing with a new motor and still breaking it in so I leaned out my Alpha Dragon a little more for a bit more power and the car felt even better, but I still wasn't able to cleanly clear the backside step up and it was costing me time. My X3 was just so good through the corners that I was able to get the lead and pull away. A few bobbles in the last few laps brought me into second, but I was able to get by on the last lap to take the win. A huge thanks to OFNA and to my trusty pit man and friend DJ for killer pit stops using the fuel gun. That's really the only way to go! Congratulations to Chad Grana for a win in the Amateur class.
HNMC Winter 9
The 9th round of the HNMC Winter series had to take place on their astro track due to the British weather making the dirt track conditions impossible to race on. That being said 51 racers braved the conditions with Kevin Brunsden dominating qualifying in the buggy and Richard Cousins taking TQ in truggy. Booking in for the 10th round, due to take place on the 31st March.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2013%2F03%2FMckenzie-takes-HNMC-Winter-Rd9.jpg&hash=ae867a8c0844cf2d6182a06e9359c17759a36554)
Niblett Starttasi toisesta ruudusta ja piti paikkansa sijoittuen toiseksi.
1. Kong Mckenzie
2. Callum Niblett HongNor
3. Gary Brace
Nättei pelejä..
Nicolas Rodriquezin set-up
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2FX3-Nico-240313-600.jpg&hash=479b7e9d84e6ffd1caf7bf7aec5ee2d6e3d475eb)
HNMC Winter 2012 2013
Niblett oli 10 kilpailua sisältävän HNMC talvisarjan loppupisteissä hienosti toinen!
1. Simon Reeves
2. Callum Niblett HongNor X3
3. Garry Brace
Kesäsarja (7 kilpailua) alkaa vajaan kuukauden päästä ja kestää syyskuun puolivälin tietämille.
DJ ajoi nitroissa sijalle 4 ja oli sähköissä maalissa hienosti 3.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.prolineracing.com%2Fblog%2Fwp-content%2Fuploads%2Fexpert-buggy-jason-miller-1st-Greg-Degani-2nd-Tanner-Stees-3rd-DJ-Sandate-4th-John-Gaines-5th.jpg&hash=46a9dfd4f2bd0c240caba3891ceb7335993a5035)
1. Jason Miller
2. Greg Degani
3. Tanner Stees
4. DJ-Sandate HongNor X3
Thunder by the Water 2013 Reported by Dj Sandate
My weekend to Lake Havasu for some racing by the water going to be great and that's what it was. Lake Havasu RC hosted their Thunder By the Water Race which was a two day event which had a practice run race and three qualifiers on Sat. and two rounds of Main races for Sun. which made for a spectacular day of racing and good fun with new and old friends. It was such a good atmosphere with lots of spectators watching us duke it out on the hard-packed and fast layout track with a huge quad section for OOOhs and AHHHs from people watching on the bleachers. I run two classes like usual, the Electric Buggy 1/8th class and Pro buggy. I managed to finish in good spirits with good handling cars after figuring out a couple of things that I had missed during the quals that had me baffled for most of the day thinking why my cars had so much rear grip but I finnaly found out why after the 1st rounds of mains that got my buggies back in the game to finish good to take home some hard earned hardware. A 3rd for electric nad a 4th for Nitro, but these plaques felt like I won more than just good finished as the weekend was so relaxing and calm even in the roar of nitro. I'm ready to go back and race again with a great group of people. Thank you Pro-Line, Sidewinder Fuels, Savox and OFNA for such great products, this racing is always fun when you have solid products.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.ofna.com%2Fnews%2Fdata%2Fupimages%2Fhavasu_pic_2013.jpg&hash=984d12d5a33d18e1c0ef562ffeb1fe35d45a14b6)
2.0 version myötä tulee pieniä muutoksia X3 Sabren manuaaliin.
http://www.hongnor-racing.com/download.asp?darea=10# (http://www.hongnor-racing.com/download.asp?darea=10#)
Raphael Robertin X3 2.0
Raphael Robert HongNor X3 2.0 Beuvry la fôret (http://www.youtube.com/watch?v=u4dbwp3MiP0#ws)
Miguel Perez podiums with X3 Sabre, Rd. 1 JBRL by DJ
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.ofna.com%2Fnews%2Fdata%2Fupimages%2FJBRL_thunderalley_2013.JPG&hash=1899fba100dde1c45e399897f80b7acc96c823c6)
Reported by Miguel Perez-It was time to head out to Thunder Alley Raceway in Beaumont, Ca. for round 1 of the 2013 JBRL series.I arrived early anticipating a huge turnout as this is one of the premier racing series in the country.Over 230 racers showed up & I new it was going to be a long day. The schedule consisted of 2 qualifiers & a main for each class.I signed up for 40+ nitro buggy & E-Buggy. I found out that there were 3 heats of 40+ and the same for E-buggy so I knew that the competition was going to be tough. My 1st qualifier was in 40+ nitro buggy. The car was dialed & I was able to sgueeze out a 4th place finish. I wish I could say the same about E-buggy as I struggled all day to find my rhythm.
The qualifiers were all done & mains were up. I qualified a solid 4th in the 40+ A-main & 2nd in the E-buggy C-main.I knew if I could finish 2nd in the C-main I could bump to the B-main & then maybe the A.The C-main was up and I puta different set-up on the car and it seemed a little better but I was still fighting it. I finished 1st & was able to bump up.I turn marshaled the next race and ran into the pits to charge batteries and get the car ready as the B-main was coming
quick. The B-main came quick & the tone sounded. I got a great jump & by the 2nd turn I was in 2nd place but could not hold it as I lost composure & made a few mistakes. I ended in 5th place. I went back to the pits a little disappointed but feeling OK with my finish.
The 40+ A-main was up & I was starting in a good position to redeem my disappointing finish in E-buggy. The tone sounded & by the 1st turn I was in 2nd place. My X3 Sabre was feeling amazing & I liked my chances for a podium finish. By the middle of the race I was comfortably in 2nd place. Towards the end of the race I started to bobble a little & let 3rd place get a little to close for comfort so I composed myself & was able to finish in 2nd place in one long day of racing. JBRL is great race program, it leads to great races and good finishes & on this day I got the chance to get a picture taken.
Robert kolmanneksi Ranskassa.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2013%2F04%2FJo-Back-wins-in-France-with-Serpent.jpg&hash=550779321abad9ff946f3045fe8f6d3553eb70e1)
1. Jonathan Bacro
2. Jérôme Sartel
3. Raphael Robert HongNor X3
BRCA nationals Round 1.
Juniori luokka.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.redrc.net%2Fwp-content%2Fuploads%2F2013%2F04%2FBRCARallyXNatsRd1-Juniors.jpg&hash=5112ebee9252f208d384cff8f71274f222488c5c)
1. Jack Embling
2. Oliver Curry
3. Callum Niblet HongNor X3
Rodriguez palkintokorokkeelle Marseillessa.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fmedia.automodelisme.com%2F2013Races%2FTT-18%2FL10-1-8-TT-Marseille-21042013%2Fi-BBGQLM4%2F0%2FL%2FP1170653-L.jpg&hash=24fe7a61f23731ab966e5d3230ba4bb4da7c9c6c)
1. Jérôme Aigoin
2. Julien Lattanzio
3. Nicolas Rodriguez HongNor X3
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fmedia.automodelisme.com%2F2013Races%2FTT-18%2FL10-1-8-TT-Marseille-21042013%2Fi-LK6544d%2F0%2FL%2FP1170604-L.jpg&hash=e861ed44e0626230934b861c85b689f367a808bc)
Lyhyt video pätkä finaalista (ja Marseillen uudesta rataprofiilista siinä samalla).
L10 : St Menet, finale Open 1/8 TT de St Menet le 21 avril 2013 (http://www.youtube.com/watch?v=sI_97ypGUZk#ws)
"Harrastaja" luokan voittoon ajoi Frèdèric Vitoux.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fmedia.automodelisme.com%2F2013Races%2FTT-18%2FL10-1-8-TT-Marseille-21042013%2Fi-zFSb3p5%2F0%2FL%2FP1170649-L.jpg&hash=f176876deff8eb6998adb66dc0512f53bbf333cf)
1. Frèdèric Vitoux HongNor X3
2. Loic Nozeran
3. Alix Sébastien
Hong Nor's Stuart Mahon takes the firts round of the NRS series with his X3 V2.0, beating UK legend David Crompton and Jon Howels.
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/601900_554447974594785_1922596928_n.jpg)
1. Stuart Mahon HongNor X3
2. David Crompton
3. Jon Howels
13. Mike Foxall HongNor
Pieni pätkä Rodriguezin ajoa EM Warm-up kisoista kun sää oli vielä suosiollinen.
Grand Prix de France 2013 Reims - Essai libre - Nicolas Rodriguez (http://www.youtube.com/watch?v=DkY17kBTHKA#ws)
Hong Nor driver Yeo Anthony took Southern Alley Round 3 A Class Champion in Malaysia with his X3 Sabre 2.0 version
(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn2/p480x480/969056_561570293882553_1432868129_n.jpg)
Team Driver Frank Azzopardi finished 2nd place in 5th & 6th Round of the (M.M.O.R.R.C) Maltese Buggy Championship with his X3 Sabre 2.0
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-frc1/575320_300858290045907_1950578401_n.jpg)
Martin Wolhuterin set-up
http://www.rctech.net/forum/attachments/nitro-off-road/1068469d1368592892-new-hong-nor-x3s-20130515125518003.pdf (http://www.rctech.net/forum/attachments/nitro-off-road/1068469d1368592892-new-hong-nor-x3s-20130515125518003.pdf)
China-KRC Manufacturers' Association points race
Le Hua Lin has recently won the Manufacturers Association point's race held at the KRC track in China.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2013%2F05%2FLe-Hua-Lin-Alpha-win-in-China.jpg&hash=fd6ac8cc09b11c786b0caf72a70f5f93380f6de6)
East Coast RC Race
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2013%2F05%2FDaniel-Law-wins-East-Coast-RC-Race.jpg&hash=7bf3732d91f3f465bd96f0a3d32574caa6f4e140)
1. Daniel Law
2. BH Gan HongNor
3. David Aw HongNor
Nicolas Rodriguezin EM warm-up kisan set up
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2FX3-Nico-190513-600.jpg&hash=5c2439112ad960cfde9d57db077977ec85fe5356)
Voiko toimia suomessa noin jäykillä diffeillä?
Lainaus käyttäjältä: GT Warrior - 02.06.13 - klo: 15.37
Voiko toimia suomessa noin jäykillä diffeillä?
Tuohon pitää jonkun asioista enemmän tietävän ja muillakin kuin turffilla ajaneen vastata, itselläni on autossa vielä perus 7000/5000/2000 joka varmasti vähän tulee muuttumaan.
Rodriguez on ajanut noilla suht jäykillä öljyillä noin vuoden verran, välillä tuotakin jonkun verran jäykemmillä.
Lainaus käyttäjältä: GT Warrior - 02.06.13 - klo: 15.37
Voiko toimia suomessa noin jäykillä diffeillä?
jos maalimalla toimii nii miksi suomessa ei toimisi.onko meillä jotenkin erilaiset radat?
nimi merkillä kuopion tekonurmella ajaja.
No onko vähän?
Tuli vaan mieleen että jos tota tarjotaan lähtökohdaksi kotimaassa niin voi olla ainakin aloittelijalle aika raju setuppi..
Itse olisin taipuvainen perinteisempään 5-7-3 tms. (siis 7 keskellä, ei edessä, no tokkopa se hirveetä eroa tekee)
Jaccon 10/7/5 tekonurmi testailua myös kokeilen mutta loppujen lopuksi jokaisen kannattaa testailla mikä itselle sopisi parhaiten. Minun tasoiselle perus harrastajalle kaikki säädöt ei ole niin just kunhan on sinne päin. Pääasia on, että harrastaminen on hauskaa :azn:
Sama täällä.
Luulin kyllä sinua enemmän proksi, noista setupeista ja voittaja kuvista
sain toisenlaisen kuvan.. Siksi lähdin kysymään voiko tosiaan olla 15-15-10
(ainakaan meillä suomessa)
Vertailuksi Kössi tulee laatikosta 4-4-2 ja se toimii aika hyvin.
15-15-10 kuulostaa truggy setupilta..
No ei mitään, jatketaan.
Dutch Buggy Cup rd 3
Rico te Rietmolen voitti hobby finaalin reilun 17 sekunnin erolla vaikka lähti finaaliin vasta 10 ruudusta. Jacco Koch jäi niukasti master finaalin ulkopuolelle.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.buggycup.nl%2Fe107_files%2Fpublic%2F1370265319_33_FT6023_buggycup_3_2013_bomb_0332.jpg&hash=5a16224404064fc8373c8ba7259f1e1e3807f13b)
1. Rico te Rietmolen HongNor
2. Jarno Pijpers
3. Mike Greijmans
Lainaus käyttäjältä: GT Warrior - 02.06.13 - klo: 23.19
Sama täällä.
Luulin kyllä sinua enemmän proksi, noista setupeista ja voittaja kuvista
sain toisenlaisen kuvan.. Siksi lähdin kysymään voiko tosiaan olla 15-15-10
(ainakaan meillä suomessa)
Vertailuksi Kössi tulee laatikosta 4-4-2 ja se toimii aika hyvin.
15-15-10 kuulostaa truggy setupilta..
No ei mitään, jatketaan.
Enemmän kaikenlaista testaillut ja honkkarilla ajellut kertoi kokeilleensa myös Rodriguezin set uppeja mutta eivät olleet toimineet hänellä. En ole törmännyt muihin joilla diffit olisi samaa luokkaa kuin Rodriguezilla. Eli set upit saattavat välillä olla aika yksilökohtaisia.
Jep.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi5.aijaa.com%2Fb%2F00264%2F12335781.jpg&hash=6f9db4c14e25d52e3e4ab27f6eaed567637670ba)
Sähkö konversio http://rc10.fi/index.php?topic=66677.0 (http://rc10.fi/index.php?topic=66677.0)
Ooksä ostanut tuon vai onko tuo pelkkä mainos?
On ostettu kuten X3e topikista selviää. Muutan toisen auton sähköksi. Ei ainakaan herätä närkästystä tai katsota kieroon jos asutuksen lähelläkin käy joskus ajelemassa jos radalle ei tule lähdettyä.
Joo se on sähköautojen hyvä puoli.
Pelle Culmsee (12v) palkintokorokkeelle Tanskassa.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.rctech.net%2Fforum%2Fmembers%2Firsr-albums-intech-drivers-picture13939-9-2nd-g.jpg&hash=d8ccf2b0d4d47d42d921a24bcb1e2a0115118dd4)
1 Steffen Culmsee
2 Rune Gustevsen
3 Pelle Culmsee HongNor
Arsac Ranska
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FNEWS%2FFlorian-160613-600.jpg&hash=b986eb7ff897def4e923f952f12683277ba90b8e)
1. Florian Valbousquet HongNor
2. Jèròme Dufaure
3. Stèphane Faure
St Firmin Ranska
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FNEWS%2FPhilippe-160613-600.jpg&hash=e02c0fb0c2ce9a2f062d8829a7cb774763576227)
1. Philippe Maignan HongNor
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/p480x480/1017210_575899879116261_643415090_n.jpg)
Opening race was held at JinQin track in XuZhou, China. RC is quite new to the area and about 40 drivers attended the event and HongNor team driver LeHua, Lin won the race with X3-Sabre 2.0.
Congratulations!
TW8F teamin Jacco Kochin tuumailua X3 Sabren / 2.0 version suorituskyvystä, optio-osista, vinkkejä ym.
http://www.twf8.ws/new/tech/car/hongnor/x3sabre/x3sabrebuild/x3sabre-performance.html (http://www.twf8.ws/new/tech/car/hongnor/x3sabre/x3sabrebuild/x3sabre-performance.html)
Uusi kori maalissa. Entisessä korissa ei ole vikaa mutta tuo on ollut jo pari kuukautta hyllyllä maalattuna leikkelyä vaille valmiina niin ajattelin nyt ottaa käyttöön pölyttymästä. Kilikaleilla maalattu (nestemaski apuna) eikä mikään hieno ilmestys mutta eikös oma auto pitäisi tunnistaa ja nähdä suht helposti radalla joten kelpaa minulle. :smiley: Muutenkin maalaus ehkä tavanomaisista vähän poikkeava, ei liekkejä ymv.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi6.aijaa.com%2Fb%2F00990%2F12444671.jpg&hash=680537ac7eea5d4838479ea1cad1425a4e0d9d15)
X3 Sabre on toiminut turffilla mielestäni aika hyvin vaikka oikeastaan diffejä (10/7/5) ja sinisiä optio iskarijousia (#410) lukuunottamatta on aika perus manuaalin set-up. Savella en ole vielä päässyt autolla ajamaan joten käyttäytyminen savella on vielä mysteeri.
Vääntynyttä etu iskaritornia ja halkeillutta siipeä lukuunottamatta (ja tietysti renkaan laakereita vaihdeltu) autosta ei ole hajonnut mitään vaikka jonkun verran on tultu hyppyreistä alas vähän miten sattuu ja aika pahan näköisestikin välillä. Eli kestävyydessä ei pitäisi jäädä muita huonommaksi. Forcen E-21R20 moottori ei ole se kaikkein "kirein kisa moottori" mutta sopii minulle hyvin treeniin/harrastelemiseen (ja kisoihinkin ok moottori) eikä käynti tmv. ongelmia ole ollut. Hintaan suhteutettuna mielestäni hyvä ja luotettava eli varmatoiminen moottori.
Treenailen (toisin sanoen harrastelen) ainakin tämän kesän ja katselen ensi kesänä jos uskaltautuisi lähtemään johonkin kilpailuun koheltamaan.
Savelle noi diffit eivät ole välttämättä kovinkaan hyvät, laita esim. 5-7-2
Savelle tietysti set-up vähän muuttuu. Aloitan suurinpiirtein manuaalin suosituksella ja siitä sitten muuttamaan tarpeen mukaan. Iskarijouset vaihtuu myös punaisiin ainakin aluksi, mutta katsotaan nyt ensin milloin pääsen savella ajamaan.
National Maltese Buggy Championship 2012/13
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.buggy-sport.info%2Findex.php%2Fgallery%2Fimage%3Fview%3Dimage%26amp%3Bformat%3Draw%26amp%3Btype%3Dimg%26amp%3Bid%3D7579&hash=9c328eb165849f80d46e238789b57de56e09de13)
Team Driver Frank Azzopardi came 2nd place overall in the National Maltese Buggy Championship 2012/13 @ (M.M.O.R.R.C) Track in Rinella Malta. With his X3 Sabre 2.0!!
-----------------------------------------------------------------------------------------------------------------------------------------
Vaihdoin alumiiniset "pinjonin pidikkeet" (saa korjata jos tietää paremman nimityksen) muovisten tilalle, vaikka ei muovisissakaan vikaa ollut. Sisempi laakeri on 5x13, alkuperäisessä molemmat on 5x11.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.twf8.ws%2Fnew%2Ftech%2Fcar%2Fhongnor%2Fx3sabre%2Fx3sabrebuild%2FJPEG%2Fcones07.jpg&hash=74c697557cd88ef203401481183ea1718754fefc)
Osien paino eroja (laakerit mukana)
(X3-44) 5.0g muovi
(X3S-22) 7.2g CNC
Eli eroa 2.2 grammaa
Rodriguezin EM-kisa väritys.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FNEWS%2Feuro2013%2Feuro2013-21-big.jpg&hash=d148bda8f85b94fcc6563fa9301382f7a589d7df)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FNEWS%2Feuro2013%2Feuro2013-23-big.jpg&hash=1a0562292c518ec304f0d6396cf582819b9681c2)
Lisää kuvia:
http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&t=53963 (http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&t=53963)
Set-up: http://www.6mik-racing.com/uploads/images/img_6mik/NEWS/euro2013/X3-Nico-060713-1200.jpg (http://www.6mik-racing.com/uploads/images/img_6mik/NEWS/euro2013/X3-Nico-060713-1200.jpg)
6MIK kori Sabrelle.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FPHOTOS%2F6MIK%2Fcarros%2FPB043-600.jpg&hash=fcc2379223c668d55c3bb0f16d258446908609c1)
HongNor has released a new optional parts for X3-SABRE, the X3S-25 42T & 14T Differential Bevel Gears Set.
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc1/553429_607722092600706_1362307675_n.jpg)
The X3S-25 gears can be used in the front for more front wheel drive which makes it easier to drive and stabilizes the rear under acceleration out of the corner.
The X3S-25 gears can also be used in both front and rear for better high speed control.
Item No:
X3S-25 42T & 14T Differential Bevel Gear Set
X3S-25A 42T Large Differential Bevel Gear
X3S-25B 14T Small Differential Bevel Gear
Neo 2013 junior class
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.buggy-sport.info%2Findex.php%2Fgallery%2Fimage%3Fview%3Dimage%26amp%3Bformat%3Draw%26amp%3Btype%3Dimg%26amp%3Bid%3D8003&hash=89a4a0b39139ae6100f1afb72ab5bcc709d0d8dc)
1. Callum Niblett HongNor
2. Lewis Beach
3. Jon Skidmore
Neo13 Juniors Final (http://www.youtube.com/watch?v=lMUcFJj7wlA#)
HongNor team driver Massimo Sartorato won the "Championship 2013 - Opitergina Racing" driving his Hong Nor X3 2.0.
The Team Jamara-HN Jesolo congratulates Massimo for the excellent results achieved at the end of a hard-fought championship.
(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/p480x480/1238150_612435192129396_821568575_n.jpg)
-----------------------------------------------------------------------------------------------------------------------------------------
Malaysian Southern Super League Round 5 Grand Final 2013
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.redrc.net%2Fwp-content%2Fuploads%2F2013%2F09%2F2013SouthernSuperLeague.jpg&hash=63d60acc3090cd1fbcaedfa59e27cded07a63d24)
1. Ben Panic
2. BH Gan HongNor
3. Lai Kok Heng
8. David Aw HongNor
Hong Nor is proud to introduce the X3 Sabre RTR Version.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fproduct%2Fpics%2Fpdt_big_2013991154057.jpg&hash=cc51327bf05beb6ef6eaddd9bc8b00d230903ff2)
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/1184770_613176955388553_523105711_n.jpg)
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/1239557_613169275389321_530698706_n.jpg)
FEATURES:
-.28 ENGINE WITH POLISHED PIPE.
-2.4 Ghz RADIO SYSTEM WITH METAL GEAR SERVOS.
-FRONT STEEL CVA DRIVE SHAFTS.
-FRONT KING PIN HUB TYPE SUSPENSION.
-ALUMINIUM HARD COATED CHASSIS WITH FRONT AND REAR KICK-UP.
-NYLON REAR SKID PLATE.
-16MM V2 HARD COATED THREADED SHOCKS.
-SOFT 16MM PRO SHOCK SPRINGS.
-FRONT AND REAR 7075-T6 4MM ALUMINIUM SHOCK TOWERS
-ONE PIECE SERVO, RECEIVER AND BATTERY TRAY
-FULL RUBBER SEALED STEEL BALL BEARINGS
-DUAL FIBER DISK BRAKES
-SIDE LOAD BRAKE CALIPERS FOR BETTER CENTER OF GRAVITY
-LONG SUSPENSION FRONT AND REAR ARMS WITH DROOP SCREWS
-3 SHOE CLUTCH
-125CC FUEL TANK WITH OPEN CAPACITY PLUG
-INTEGRATED FUEL TANK CLIPS FOR EASY MOUNTING OF FUEL LINES
-FULLY ADJUSTABLE TURNBUCKLES FOR STEERING AND CAMBER
-3 OIL FILLED DIFFERENTIALS, FRONT , REAR AND CENTER
-FORGED STEEL DIFFERENTIAL BEVEL AND PINION GEARS
-FRONT AND REAR 2.3MM SWAY BARS
-DUAL STAGE FORWARD FACING AIR FILTER
-SLIDER ENGINE MOUNTS
-REAR MUD GUARD AND NARROW CHASSIS GUARDS
-RED ALUMINIUM HIGH-LIGHTS FOR THE CUSTOM LOOK
-ALUMINIUM HINGE PIN HOLDER WITH INSERTS
-HI-DOWN FORCE WING
-LIGHT-WEIGHT INCH-UP WHEELS WITH SOFT RUBIX TIRES
-OVERALL LIGHT-WEIGHT BUGGY WEIGHING IN JUST 3300g
-PRE-CUT PRINTED LEXAN BODY
SPECIFICATIONS:
LENGHT: 515mm
FRONT WIDTH:307mm
REAR WIDTH: 303mm
HEIGHT: 188mm
WHEELBASE: 325-330mm
FRONT TOE-IN: ADJUSTABLE
WEIGHT:3300g
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/1238912_613169272055988_243174101_n.jpg)
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/1236485_613169258722656_2075605461_n.jpg)
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/1174892_613169238722658_1196276070_n.jpg)
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/1174880_613169145389334_1386515887_n.jpg)
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/540110_613169138722668_1173620522_n.jpg)
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/1175087_613169122056003_567692031_n.jpg)
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/1236771_613169105389338_789494395_n.jpg)
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/1234992_613169078722674_1559795094_n.jpg)
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/1174750_613169062056009_1512642635_n.jpg)
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/1185039_613169058722676_344567442_n.jpg)
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/1230086_613168982056017_1698233361_n.jpg)
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/1233457_613168968722685_1181774372_n.jpg)
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/998273_613168955389353_1458841909_n.jpg)
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/1236060_613168932056022_668348228_n.jpg)
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/1170921_613168935389355_849466436_n.jpg)
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/1185213_613168915389357_1646695495_n.jpg)
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/1236390_613168862056029_386276802_n.jpg)
(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/1009866_613168865389362_1009039552_n.jpg)
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/1236634_613168832056032_821488531_n.jpg)
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/540109_613168828722699_1640041809_n.jpg)
HongNor X3 Sabre RTR manuaali PDF- tiedostona ladattavissa.
http://www.hongnor-racing.com/program/files3/download.asp?sn=535 (http://www.hongnor-racing.com/program/files3/download.asp?sn=535)
Uusi optio-osa löytyi manuaalista: CNC 7075-T6 Aluminum Front Upper Plate. (X3S-24)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi4.aijaa.com%2Ft%2F00814%2F12654484.t.jpg&hash=35bd34a7746604106162e4d89b566ebae9b0b398)
Tuossa kuva osasta.
HongNor has released an additional optional part for X3-SABRE, the CNC machined 7075-T6 Front Upper Plate with Hard-Coated.
This new upper plate can reduce chassis flex and provides durability.
Item No. X3S-24 CNC Machined Front Upper Plate (For:X3 Sabre)
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/p480x480/1233326_617444068295175_952472515_n.jpg)
Malaysia National League 2013 (MNL) Round 4.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2013%2F09%2FDavid-Lim-wins-Malaysia-Nat-Rd4.jpeg&hash=a93bde1547cfb99cd7aec2873fd3963f31169ed0)
1. David Lim
2. David Aw HongNor
3. Didier Perrin
X3 Sabre makes podium in South Africa
Reported by DJ Sandate - Local South African driver Thomas Schmuck took his X3 Sabre to the RCX Challenge in Komatiport South Africa a small town in the very north east of the country. The event was a good turnout and was a great success and even JQ himself come to the race and getting the win but Thomas put his X3 on the podium to finish third. Hong Nor X3 was racing with bigger name cars as the X3 has very little name title in South Africa but Thomas is loyal to the Hong Nor product even showing OFNA a little love with decal branding on his wing "Thank YOU Sir". It was only great to see the X3 race for the top places so his story get on to our site with great honor. Thomas I hope to hear more of your racing and keep OFNA in your heart will be cheering for YA.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.ofna.com%2Fnews%2Fdata%2Fupimages%2FTSCHMUCKPIC.jpg&hash=1225eb3ede72852b7a5685e8c08fecc5a06aa1e3)
Uusi osa saapui aika nopeasti julkaisun jälkeen tänne pohjolaankin.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi5.aijaa.com%2Ft%2F00994%2F12688699.t.jpg&hash=28c2fbe5a0d159533e42c8be313c2f9074e349f4) (http://aijaa.com/As0KIZ)
Muovinen (X3-51) 10.7 grammaa
Alumiininen (X3S-24) 14.3 grammaa
Painoeroa 3.3 grammaa
Borneo League Round 4
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/1175046_10201533374311890_959991556_n.jpg)
1. WC Foo HongNor X3
2. Didier J
3. Jimmy Koo
8. ZEE HongNor X3
GHL 1/8 BUGGY RACE 2013 BRUNEI
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2013%2F10%2FAlpha-wins-GHL-Race-in-Brunei.jpg&hash=0b998561d80e1b36059eaf6ea408d8d210820188)
1. ZEE HongNor X3
2. Brian Lim
3. Jimmy
LAP PARADISE 1/8 OFF-ROAD LEAGUE 3
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2013%2F10%2FDidier-Perrin-wins-Lap-Paradise-Race.jpeg&hash=2db73dbbdd1d3223af85c40447341bd4cdc49324)
1. Didier Perrin
2. BH Gan HongNor X3
3. Tan Chee Meng
4. Daivid Aw HonNor X3
Jakarta Regional Buggy Champ Rd.5
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.novarossi.it%2F2012%2Fimages%2Fnews%2F2013-Jakarta-Regional-Buggy-Champ-Rd5.jpg&hash=c72c01f09f4994dbc3dfef8bf873cd48424ed14d)
1. Adrian W
2. Hakinen Malik
3. Chopin Yusuf Hongnor
11. Stefanus Pipi Hongnor
Dutch Buggycup 2013
Jacco Koch jälleen mestariksi 40+ sarjassa
For the second year in a row, Dutch Hong Nor, CRD and TWF8 team rider Jacco Koch, won the Dutch Buggycup Championship 2013 in the 40 + class, with his Hong Nor X3 Sabre 2.0 buggy!
Congratulations Jacco!
Jacco wish to thank his sponsors Hong Nor, TWF8 and Custom Racing Decals for their support!
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/p480x480/1374159_634073099965605_1332851466_n.jpg)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.buggycup.nl%2Fe107_images%2Fnewspost_images%2F40.jpg&hash=c87910078c2a9c68f34c0505c277a2871d02dad5)
DJ and the X3 Sabre finishes 3rd in the TLR Series
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.ofna.com%2Fnews%2Fdata%2Fupimages%2FTLR_SERIES2013.jpg&hash=209c5c27f9325a8ba703dc75aa79dcc101fa3ff2)
Chula Vista RC Club hosted the Team Losi Racing Series a 5 race series that was held just about two weeks apart from each race. The track had changes throughout the series making challenges for every driver, the track is huge and was sometimes very fast and go to a more technical track for every driver skill set. I raced all 5 races and had 1 dnf late in a race which was throw out, the races were all exciting and sometimes frustrating but in all just plain good racing. I managed one TQ in one of the races and that keep me close to 3rd in the series, the last race I needed to place high, but one section of the tracking was not to my liking and was killing my pace. I was attacking too hard and fumbling to get control in the quals. The main was down then up as I started good but rolled alot in the middle of the race after the first pit I got better control and worked forward with other drivers having issues to and falling apart late in the race, I charged as hard as I could as the tires wore and I started pushing through the corners so more throttle input earlier would make my car better and race back into the top 5. All I needed was that spot to take home 3rd in the series because of my TQ point and that where I finished in the series one point ahead of my competitor and a place on the podium. I could not have done it without the OFNA drivers Mario Netto,Dylan Elliot,Joe,Dave Durant and Mason Elliot though not a team driver(X-RAY) has help out in split seconds to get me back on the track to race and others that help along the way, it's always fun to go out and race with buddies and scream and yell at them because at the end of the day it's all good talk and laughs.
T-Work's
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi1.aijaa.com%2Ft%2F00775%2F12799874.t.jpg&hash=8a8fdd1410d78306935af8ef6ad75a2bc0a718c4) (http://aijaa.com/wuWb8b)
HongNor X3 & X3E Alum. Centre Drive shaft Safety Collar TO-163 2pcs/pack
Indian RC Dirt Series Rd2
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2013%2F11%2FAmey-wins-Indian-RC-Dirt-Series-Rd2.jpg&hash=0528f3753359d9ed66269a8aaff5f3f30f9c7d3b)
1. Amey
2. Murali HongNor X3
3. Ajo Joseph
-----------------------------------------------------------------------------------------------------------------------------------
Last weekend on Nov.03.2013 an opening race was held at ShinChu track in Taiwan, Hong Nor team driver Cheng Yi Yuan won TQ and A1 with his X3 Sabre 2.0. Congratulations!
(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/559403_644847905554791_162068287_n.jpg)
---------------------------------------------------------------------------------------------------------------------------------------
Congrats Hong Nor driver won Southern Alley Night Race Fever 2nd Nov 2013..
TQ - Loon Lee HongNor X3
A1 - Cat'z Farez HongNor X3
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc1/p480x480/576604_644836815555900_2101970129_n.jpg)
Slow motion pätkä Callum Nibletin ajosta
Callum Niblet Slow Mo 120 Fps HD (http://www.youtube.com/watch?v=jiAcc3Hsl9Y#ws)
Olipa mahtavat saundit moottorissa-aivan kuin honda cr500 ois möyriny menee... :cool:
Miguel Perez 2nd in the JBRL Series in 40+ Reported by Dj Sandate
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.ofna.com%2Fnews%2Fdata%2Fupimages%2Fmiguel40%2B_2013.jpg&hash=2d56c3544c659a10b7b0e01f3c68681a039abc5e)
The JBRL Series is finally done from early in the year with several races with tracks all around the So Cal area,Pro-line,CVRC,Thunder Alley,Palm Desert,ARC,Revelation and finishing up last weekend at Hot Rod Hobbies. For Miguel it was a hard fought season racing and fitting in some vacationing between the races to travel Europe, with all the racing going on in the season the JBRL was the one he needed to stay in the battle with Tim Long the JBRL 40+ champion. Their race at the finale at Hot Rod was a race for consistency and finishing out the year with a good run to hold on to 2nd for the series, a 4th place run in the race kept his points and cash in his pocket for some hardware and pictures. It was a long weekend but well worth it Miguel said as it was his first race at Hot Rod and an experience so different from other tracks as it was so blue-grooved that tires turned to slicks at the end of their runs, so good running MR. Perez and putting the great effort and showing that the X3 can duke it out with the best.
LAP PARADISE ROUND 4 Grand Final
1. Youyi
2. David Aw HongNor
3. Loon Lee HongNor
T-Work's osia
Graphite Radio Tray Support Mount TO-168
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi.ebayimg.com%2Ft%2FT-Works-Graphite-Radio-Tray-Support-Mount-For-HN-OFNA-Sabre-X3-%2F00%2Fs%2FNDgwWDY0MA%3D%3D%2Fz%2F7WwAAOxy4dNSqAvh%2F%24_3.JPG&hash=9f2a8e988baa5252b282090a1c9afe30b9619e63)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi.ebayimg.com%2Ft%2FT-Works-Graphite-Radio-Tray-Support-Mount-For-HN-OFNA-Sabre-X3-%2F00%2Fs%2FNDgwWDY0MA%3D%3D%2Fz%2FUJoAAOxyRhBSqAvf%2F%24_3.JPG&hash=e3a1ff8ebd564c480f83c5f46e3c4fd361b8206f)
Aluminum low body mounting cap, grooved for folding shock boots TO-002
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi.ebayimg.com%2Ft%2FHong-Nor-Aluminum-low-body-mounting-cap-grooved-for-folding-shock-boots-%2F00%2Fs%2FMTEwMFgxNDAw%2F%24%2528KGrHqN%2C%21k0FClQoqm9JBQ0oWjHUmQ%7E%7E60_57.JPG&hash=95156234d7fe97cc54c0d698f36ca4fcd18d897f)
Vuoden vaihtuessa ja rakettien paukkeessa on aika tehdä (tosi) lyhyt yhteenveto X3 Sabresta viime kesältä. Pääsin kesällä radalle jonkun vuoden tauon jälkeen ja se tietenkin näkyi ainakin alussa lukuisina kohelluksina ja mälläyksinä (vaikkakin sisäradalla ehdin talvella taas totuttelemaan ajamista). Kaikesta huolimatta auto kesti tällit hyvin eikä suurempia remontteja tarvittu. Lähdin radalle perus manuaalin säädöillä jotka toimivat hyvin turffilla enkä pieniä muutoksia lukuunottamatta lähtenyt säätöjä suuremmin muuttamaan kesän aikana. Eli ainakin turffilla auto käyttäytyy rauhallisesti ja ainakin itselleni hyvin (ensi kesänä sitten saviradoille pöllyttämään).
Kesän aikana vaihdoin autoon ainoastaan etuiskari tornin (ei vääntynyt paljon mutta ehkä tarpeeksi) ja säädettävän aurauspalan muoviosan (L3).
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi7.aijaa.com%2Ft%2F00295%2F12939454.t.jpg&hash=43bb2d41a573661235fdc21585d523ca86f8bc4f) (http://aijaa.com/gaWqda)
Kardaanien tapeissa on vähän kulumaa mutta niitä ei tarvitse vielä hetkeen vaihtaa. Tietysti muutaman laakerin ja kytkipalat vaihdoin mutta ne ovatkin kulutustavaraa. Honkkarin siiven vaihdoin pari kertaa mutta nyt autoissa on käytössä Pro Line ja Jconcepts illuzion siivet jotka varmasti kestävät pidempään. Kun alkuperäisen siiven vaihtaa johonkin toiseen, en usko, että varaosia tarvitsisi olla varalla isoa kasaa ja nyt Suomestakin saa suoraan käytännössä kaikki osat.
Toivottavasti ensi vuonna tulisi kokemuksia ja kommentteja muiltakin auton omistajilta ettei menisi ihan yksin jutteluksi tämä aihe.
Hyvää harrastuksen täyteistä vuotta 2014 kaikille pienoisautoilijoille. :smiley:
Jukka
Mustien 1,0mm kytkinjousien lisäksi tullut (jokunen hetki sitten mutta kuvaa en aiemmin löytänyt) jäykemmät hopea/kromi väriset 1.1mm jouset (#407D).
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fhongnor-racing.com%2Fprogram%2Fproduct%2Fpics%2Fpdt_big_20122175125346.jpg&hash=8e62c46a1331f7d6abc3fded8dab5c3b09d407f6)
Rymistelyä Sardiniassa
Terralba 04.01.2013 (http://www.youtube.com/watch?v=dlKjoXI3XM4#noexternalembed-ws)
Lap Paradise 1/8 Off-Road League Round 1 2014
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/q80/s720x720/1555418_702158536482015_245074376_n.jpg)
1. Chan Kim Hoi (Boy Chan)
2. David Aw HongNor X3
3. Loon Lee
Nicolas Rodriguezin Warm up GP Montpellier set-up.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2Freglages-NICO-260114.jpg&hash=ed278e9eef1ba978e55b97fab7f45b7f225de464)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FNEWS%2FWUP-260114.jpg&hash=54f76cccfe88a6dd159312f88d5465093d312099)
Pari kuvaa Rodriguezin autosta.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2FNico2014-1.jpg&hash=cc493c317bcd6be05925b562a9bd6b67f58a8731)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2FNico2014-2.jpg&hash=f2033184622cd22a034f5cffdb61ca811e78260d)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2FNico2014-3.jpg&hash=212ce936839a7208554c61e3763ec6f2d5072d59)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2FNico2014-4.jpg&hash=673c1b9cb2edeb16d2f656ce7cd47841eb70dfce)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2FNico2014-5.jpg&hash=c14908e185223cdff827a321e64e1bf7094bd500)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2FNico2014-6.jpg&hash=ade0c3b93a1732ca9489384cee72c93ad8235b5a)
Damien Boudetin X3 tulevaan Montpellierin kisaan.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2Fboudet1.jpg&hash=ded6d5a596d78ed37b8f00dd1d5d072c1220317e)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2Fboudet2.jpg&hash=772363510320240150c1f03d27f18d98badd18b1)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2Fboudet3.jpg&hash=a3ccf6dbc4ed243793e5ac7799a472d94f2f9ccc)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2Fboudet4.jpg&hash=0c1c704fa872f0677dda3d247691be4a277c005c)
Minun ensi kesän kilpuri
(//)
Lainaus käyttäjältä: C1S F1 - 15.02.14 - klo: 02.20
Minun ensi kesän kilpuri
(//)
Hienoa, toivotetaan menestystä ensi kesän M8 sarjaan.
Murali Kannadhason kurvaili (The Indian RC Dirt Series) intian mestariksi. (truggy sarjan 2)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.vp-racing.com%2Fpic%2F2014218173154564.jpg&hash=d1917ae9b86b4978b7bf8f667c2123c5a215e58c)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.vp-racing.com%2Fpic%2F2014218173140136.jpg&hash=2158816b804abeae368381c15393377c2751de66)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.vp-racing.com%2Fpic%2F2014218173127609.jpg&hash=01dddb217f64c15b952678ee79029d285cd9adf2)
nyt mose pois tältä foorumilta
Lainaus käyttäjältä: olenhan jonne - 19.02.14 - klo: 13.37
nyt mose pois tältä foorumilta
Anteeksi maalaisuuteni mutta voisitko kertoa saman suomeksi?
Joo minäkin haluaisin tietää???? :shocked:
Tämän auton jarru on suora lainaus kyosho burnsista :tongue:
Jerzi
Kyllä Jerzi, mutta tuplana. Joten ei se ihan kopio ole :laugh: Ja eihän se voi olla huono jos samanlaista palikkaa löytyy kössi-brändin alta :shocked:
Ranskalaisen Thomas Musson omia hiilikuitu värkkäilyjä X3e Sabreen.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2Fx3%2520thomas%2Fthomas-9.jpg&hash=1775252276bd0f14e904690ba84f88acfdaa9596)
Tuohan on patterikasi, jos pilkkua viilataan se ei edes kuuluisi tähän topicciin :cheesy: Tai mistä minä mitään tiedä, mutta näyttää toi tankki vain kauhean sähköiseltä :afro:
Lainaus käyttäjältä: C1S F1 - 02.03.14 - klo: 22.32
Tuohan on patterikasi, jos pilkkua viilataan se ei edes kuuluisi tähän topicciin :cheesy: Tai mistä minä mitään tiedä, mutta näyttää toi tankki vain kauhean sähköiseltä :afro:
Juu, X3e kyseessä kuten tuohon ylemmäs laitoin mutta melkein tähänkin topiciin käy :grin:
Taiwanin Wei Li Cup
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2014%2F03%2FJason-Huang-wins-Wei-Li-Cup-640x291.jpg&hash=b805c839afda56f6a398ca801fc629e801d10ed1)
1. Jason Huang
2. Guang He Chen
3. Jiun Ru Shau HongNor X3
(TQ) Cheng Yi Yuan HongNor X3
Video finaalista. Rata... no joo, rata on.
偉立盃第21屆1/8引擎越野車全國公開賽 (http://www.youtube.com/watch?v=dSFVIghNZQs#ws)
Sain vihdoin laitettua autoon pari osaa jotka ovat olleet pakissa jo jonkin aikaa.
Puskuri, uudempaa 2.0 Version mallia. Osanumero pysynyt samana (X3-52). Vähän pyöreämpi muoto, paksumpi ja jämäkämmän oloinen kuin alkuperäinen vaikka siinäkään ei ole ollut kestävyys ongelmaa. 2.0 versiossa ei lue HongNor ja painoa 3.6 grammaa enemmän.
1.0 Versio 5.5 grammaa
2.0 Versio 9.1 grammaa
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Faijaa.com%2Fimg%2Fb%2F00716%2F13101290.jpg&hash=a4b6a75b6c7494f9f28d90b8dc88644012225349)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Faijaa.com%2Fimg%2Fb%2F00318%2F13101309.jpg&hash=8e774eac155f42b1ccf22b32473d2a3b5c1049e9)
T-Work'sin olkoon nimeltään vaikka kardaanin pinnin pidätinholkki tai kardaanin suojus (Centre Drive shaft Safety Collar) TO-163.
Alkuperäistä väljempi sovitus joten katsotaan ajan mittaan miten toimii. Painaa aika lailla saman kuin muovisetkin.
Muovinen 3.4 grammaa (2kpl)
Alumiininen 2.6 grammaa (2kpl)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Faijaa.com%2Fimg%2Fb%2F00959%2F13101361.jpg&hash=422f0355e625e5b956fd0df1947c13faea82fc80)
Linkit parin Ranskalaiskuskin autojen kuviin.
Manuel Aubourg http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&t=56745 (http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&t=56745)
Nicolas Rodriguez http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&p=777305#777305 (http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&p=777305#777305)
Thomas Musso http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&p=777304#777304 (http://www.rcmag.com/modules.php?name=Forums&file=viewtopic&p=777304#777304)
LAP PARADISE 1/8 OFF-ROAD LEAGUE 2
(https://scontent-b-ord.xx.fbcdn.net/hphotos-frc1/t31/p180x540/1974298_728824713815397_904549104_o.jpg)
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/t31/p180x540/1492249_728822980482237_1008013003_o.jpg)
1. Wenyi
2. Ron Kon HongNor X3
3. Daniel Law
7. David Wong HongNor X3
13. David Aw HongNor X3 (yksi sarjan taustahäärääjistä)
Alumiiniset hubit muovisten tilalle. Alkuperäisten kanssa ei ole ollut mitään ongelmaa enkä kovasta yrityksestä huolimatta ole saanut niitä hajotettua.
Taas painoeroja:
Alumiiniset (X3S-20) 26.6g
Muoviset (X3-48) 29.3g
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi9.aijaa.com%2Fb%2F00374%2F13177908.jpg&hash=c84fddd39b34efc5f7018542a672c14624bfdd30)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi10.aijaa.com%2Fb%2F00882%2F13177946.jpg&hash=656504a63e64f3220feac351c28eae2b915cedd2)
Yeah 3 päivää vietetty lavangon radalla ja saatiin jopa kuvaa ekoista metreistäni M-8:n ratissa :tongue: https://www.youtube.com/watch?v=0g8jSE__HDM (https://www.youtube.com/watch?v=0g8jSE__HDM)
The Western Australian State titles this year for Buggy have been raced.
Kyle Francis, Hong Nors Australian driver, placed FIRST with his X3 Sabre Pro beating a few past Australian champions and making a convincing win in challenging conditions.
(https://scontent-b-fra.xx.fbcdn.net/hphotos-prn2/t31.0-8/10295339_10152355949308844_723645486408995749_o.jpg)
Lainaus käyttäjältä: C1S F1 - 20.04.14 - klo: 22.56
Yeah 3 päivää vietetty lavangon radalla ja saatiin jopa kuvaa ekoista metreistäni M-8:n ratissa :tongue: https://www.youtube.com/watch?v=0g8jSE__HDM (https://www.youtube.com/watch?v=0g8jSE__HDM)
Volvospede taisi olla myös kuvissa härnäämässä Assolla.
Noniin, saahan sitä edes jotain autosta hajalle kun oikein yrittää :tongue: Pääsuoran päähän, ei täyttä laukkaa mutta tarpeeksi kovaa ja eteen hyppää hiekalla täytetyn paloletkun pää niin tuossa on lopputulos. Ohjauspala (X3-47) poikki ja auto kuperkeikkaa metsähallituksen puolelle.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi7.aijaa.com%2Fb%2F00846%2F13248953.jpg&hash=08fb4e76c67c4fd4bb779ce282835b6f4ce4a4c3)
Tuossa oma räpellys iskaritornin ja iskareiden suojaksi. Varsinkin tekonurmi ymv. joustamattomilla/murtumattomilla alustoilla tuosta saattaa jopa olla hyötyä. Ei mitenkään silmiähivelevän hieno mutta pääasiallinen tarkoitus onkin mahdollinen rahan säästö.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi10.aijaa.com%2Fb%2F00793%2F13248980.jpg&hash=b2a9c7dbaebd2eb91ed49b6f9f65a770f7e8da81)
Otsikon mukainen honkkari lähti tilaukseen. Ei tarttee juccan ihan yksinpuhelua täällä sit pitää. :azn: On vai köyhänmiehen rtr malli, mutta siitä lähdetään sitten rakentelemaan. Jos pitää kovempaa päästä niin pannua vaihtamallahan siitä selviää. Pitäähän sitä käydä heti kokeilemassa radallakin miten istuu omaan käteen.
Osaisitko sanoa mistä parhaiten ko laitteeseen saa hopup osaa?
Lainaus käyttäjältä: Lerppu86 - 15.05.14 - klo: 21.28
Otsikon mukainen honkkari lähti tilaukseen. Ei tarttee juccan ihan yksinpuhelua täällä sit pitää. :azn: On vai köyhänmiehen rtr malli, mutta siitä lähdetään sitten rakentelemaan. Jos pitää kovempaa päästä niin pannua vaihtamallahan siitä selviää. Pitäähän sitä käydä heti kokeilemassa radallakin miten istuu omaan käteen.
Osaisitko sanoa mistä parhaiten ko laitteeseen saa hopup osaa?
Hienoa, että muitakin honkkarikuskeja löytyy ja vielä lähiympäristöstä. Hyvä, hyvä. :smiley:
Suomesta löytyy hyvin osia. Laittelin myös yv:tä.
Indonesia National Buggy Race @ Cnetic Track - Surabaya, Rd 3
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2014%2F05%2FAndre-Irawan-wins-Indonesia-Nat-Rd3.jpg&hash=44a862152e928f78fe8eb69fb3217115124637c2)
1. Andre Irawan Hongnor X3
2. Adrian Wicaksono
3. Hariadi Lie
X3S-26 CNC Center Alum Joint Cup
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fnews%2Fpics%2Fbig_20145305114039.jpg&hash=8fd9ff0e03842b4ffaad2f2f3b4cd9e78b81ea7a)
The SP Tyres Trophy 2014
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/10509667_768843669821880_2340373778804439829_n.jpg)
TQ and win Marco Grandesso, with Hong Nor X3
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
TQ and Win in Jaben fun race
(https://scontent-a-fra.xx.fbcdn.net/hphotos-xap1/t1.0-9/p180x540/10418184_756377544401826_6953568832680780529_n.jpg)
1. Chopin Yusuf (TQ) HongNor X3
2. Hakkinen Malik
3. Aswin Narwandi
T-Work's "servo/radioboxin jäykkäri" (TO-168) tuli niimein tänne peräkylällekin.
Painon lisäystä tuli 4.0 grammaa.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Faijaa.com%2Fimg%2Ft%2F00184%2F13370563.t.jpg&hash=453b0027a4fbe17ab344b928e10f148a940d4b9e)
Coppa UISP Treviso-2014 (Cimavilla)
(https://scontent-b-fra.xx.fbcdn.net/hphotos-xpf1/t1.0-9/10389717_777281112311469_3630144678842636856_n.jpg)
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/q73/s720x720/10445937_777281042311476_5619375627472302899_n.jpg)
1. Marco Grandesso HongNor X3 2.0
2. Massimo Sartorato
3. Nicola Baggio
Lap Paradise 1/8 Off-Road League 4
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2014%2F07%2FBen-Panic-640x290.jpg&hash=66e1a42b60419411e2cf7cdc0fbc5a8d2187507a)
1. David Aw HongNor X3
2. Ah Leng
3. Kenny Chin
Gemona
Final of Champioship "From the Sea to the Mountains"
Marco Grandesso win Race and Championship with Hong Nor 2.0.
2nd place in Race and Championship for Gian Luca Zecchini also with Hong Nor 2.0.
2014 it's really a fantastic Season !
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/p180x540/1453347_788351064537807_6892298036606017660_n.jpg?oh=710da316afddfe2e062a23a40d60c7c3&oe=5481007A&__gda__=1415267592_077f8d3de17687ff8e2ceaa7a6e59279)
Vihdoin keskidiffin kevennetyt ulostulot (X3S-04) RTR versioihin (X3-77) joita tulen käyttämään keskidiffissä jatkossakin.
Vaikka jarrut ovat toimineet tähänkin asti moitteetta, levyt tulevat kestämään entistä paremmin.
Paino/pari:
X3-77 16.9 grammaa
X3S-04 15.6 grammaa
Eli painoa lisää vain 1.3 grammaa.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.aijaa.com%2Fimg%2Ft%2F00425%2F13452866.t.jpg&hash=1768f201c0a1afbc446ab6f103f4a844e94f3322)
Samalla hankin RTR koiranluu kardaanit (X3-75)joita kokeilen jossain vaiheessa. Koiranluihin tarvitsee toiset ulostulot (G-13).
Kuvassa RTR ylhäällä ja CVD alhaalla. Vaihtamalla molemmat kardaanit, painoa tulee lisää 7.0 grammaa (eteen +4.5g ja taakse +2.5g).
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.aijaa.com%2Fimg%2Ft%2F00194%2F13452921.t.jpg&hash=b9715b214ee8f1ac92211c074ef182f83231d5be)
Ainiin, etummainen tukivarren kiinnike/pidike ymv. (X3S-06) oli aavistuksen vääntynyt (varmastikin reunaputken kiinnitystappi osunut siihen pariin kertaan radalla koska putken päältä mennessä välillä vauhti pysähtyi kuin seinään). Vääntymisellä en huomannut olleen oleellisesti vaikutusta auton käyttäytymiseen ja tukivarsi ym. liikkuivat yhtä jouhevasti kuin ennenkin mutta vaihdoin silti osan. Eli tosi vähäisillä osien rikkoontumisilla ja vääntymisillä olen selvinnyt :smiley:
Milloinkas näemme tämän viestinketjun pääasiallisen ylläpitäjän myös pokkaamassa kultaa palkintokorokkeella? :grin:
Lainaus käyttäjältä: meritane - 20.08.14 - klo: 10.00
Milloinkas näemme tämän viestinketjun pääasiallisen ylläpitäjän myös pokkaamassa kultaa palkintokorokkeella? :grin:
Minua tuskin tullaan näkemään edes Ö-finaalin palkintokorokkeella (Savirataharjoittelua takana viimeisen noin 5 vuoden aikana ruhtinaalliset 3.5-4 tuntia). Pitäisi saada ensin edes jonkunlainen tuntuma savella ajoon, että kisailemaan huvittaisi lähteä. Eli tuskin lähden kisoihin vain kisailun vuoksi kylmiltään kokeilemaan. Mutta ehkäpä joskus tällä vuosituhannella :tongue:
Hui.
Kerkesin ennen juccaa.
Sit asiaan. Hong Nor on julkaissut X3 autoihin uudet jarrut, joissa on koneistetut jarrulevyt ja kivipalat.
Honkkarillahan on entuudestaankin noita, mut X3 autossa etu- ja takajarrullehan on eri kokoiset levyt, joten ei ole ollut mahdollisuutta käyttää niitä kuin toisessa. Tämän uuden tuotteen myötä saa molemmat jarrut paremmaksi helpolla.
Tuote on X3S-27:
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.rc-navetta.fi%2FRC10%2FX3S-27.jpg&hash=eac9c5365898b73cf191f5bc413d065dd638f248)
Terkuin
Jarno
LAP PARADISE 1/8 OFF-ROAD CHALLENGE
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/p526x296/10593037_798267236879523_7098611566775338462_n.jpg)
1. David Aw HongNor X3 (TQ & Champion)
2. Vincent Yong
3. Yong Youyi
2014 T.R.C.C.A 1/8 CHAMPIONSHIP
1. Cheng Yi Yuan HongNor X3
2. Jason Huang (TQ)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.asiarc.info%2Fdata%2Fattachment%2Fblock%2F93%2F930a80ce6af884815f318521d56f60d4.jpg&hash=b6422cb2717726e367ce744b49d6d3b2a73ea47e)
A-Finaali video: https://www.youtube.com/watch?v=wohLtoWxKoM&list=UU9OjZodJyu5PonsyOfSBd4w (https://www.youtube.com/watch?v=wohLtoWxKoM&list=UU9OjZodJyu5PonsyOfSBd4w)
Viimein sain aikaiseksi hankkia uudet "jouston esto/säätö" ruuvit (Mugen E0183) tavallisten ns. pidätinruuvien tilalle. Muutamalta valmistajalta noita löytyy, honkkarilta ei ainakaan vielä.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.ktf-shop.de%2Fimages%2Fproduct_images%2Finfo_images%2F2587_0.jpg&hash=c035d89a069a9d0aa5a5e8d3c69146ce0ca94c43)
Mortegliano UD - October 5, 2014.
Hong Nor wins in both categories, F1 and F2 thanks to the riders, Gabriele Zecchini and Radek Trawinsky.
They have dominated their final winning the race with present many of the best riders in the North East Italy.
(https://scontent-b-lhr.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/10494830_819083184797928_5669118910147214869_n.jpg?oh=a7d0c68866de250f1ff3aef8a8dae0c7&oe=54AD51F9)
Jakarta Buggy Championship Rd4
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.redrc.net%2Fwp-content%2Fuploads%2F2014%2F10%2FJakartaBuggyChampsRd4.jpg&hash=d78e85fa782e3c00880115582ea4f3507280637a)
1. Jason Nugroho
2. Adrian Wicaksono
3. Chopin Yusuf HongNor X3
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Danish 1/8th off-road nationals Rd.7
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.buggy-sport.info%2Findex.php%2Fgallery%2Fimage%3Fview%3Dimage%26amp%3Bformat%3Draw%26amp%3Btype%3Dimg%26amp%3Bid%3D12144&hash=26077b93debac057feb73004fc8ee97381033727)
1. Mike Gosvig
2. Magnus Frandsen
3. Pelle Culmsee HongNor X3
Guy Le Henin set-up
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.6mik-racing.com%2Fuploads%2Fimages%2Fimg_6mik%2FTECHNIQUE%2FX3%2520SABRE%2FX3-Guy-280914.jpg&hash=70b9336b2d8b6af4e3aff99a7fc739486cc98520)
Ranskalais muutoksia.
Nicolas Rodriguez siirtyy ensi vuonna K-autoille ja Thomas Musso Radiosistemille.
LAP PARADISE 1/8 OFF-ROAD BUGGY 6 HOURS ENDURANCE RACE
(https://scontent-a-ams.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/s720x720/10411081_10205363659034888_5375500297986990363_n.jpg?oh=375aaa80c205d13dca76d93249bd9372&oe=54DEA9C8)
1. SG Team One HongNor 451 laps
2. Team ETK 439 laps -12 laps
3. Team Run Run Lai 415 laps -36 laps
(https://scontent-b-ams.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/1458669_10205363653554751_5773587487931245263_n.jpg?oh=eb2d0e575885697e518f85828d97f575&oe=54DFE041)
Overall Standing Jaben Series 2014
(https://scontent-a-mad.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/s720x720/10262068_844782718894641_7829776169871870814_n.jpg?oh=d2d9f28dd17350c33451e904d226c4c8&oe=551C1A2E)
(https://scontent-b-mad.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/p180x540/10394045_844782778894635_5673372272099639372_n.jpg?oh=7537d3a8d6d73c61bbb2d6af04668a02&oe=54D8ECB4)
1. Adrian Sutanto HongNor X3
2. Rizky Pradana
3. Chopin Yusuf HongNor X3
Sain startin viriteltyä Sabrelle niin ettei tarvitse arpoa miten auton siihen asettelee (parina edellis vuotena en ole ehtinyt :tongue:) Kun käytössä ei ollut tarvittavia lisäpaloja ja viitseliäisyyttä tällä kertaa oli niin tein sopivat ohjurit (etra) muovista.
Nitro SCRT-10 corrin starttiin yritän taiteilla saman tyyliset.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi4.aijaa.com%2Fb%2F00317%2F13646154.jpg%3F9c8683f2e0eda3e54cdf99a5be72266cfd4469b9bd18bf978671d862bc0edb79f84e234bb76e96d284cc5b045d35e977&hash=25d3b9bd8795364b60af72b5ba36a44927d7c125)
LAP PARADISE 1/8 OFF-ROAD LEAGUE 1
(https://scontent-b-ams.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/p180x540/10906435_10200144474571711_3956169963547212807_n.jpg?oh=77531e9ba41ad8d14e6ff688d7e9f54f&oe=552CB133)
1. Bh Gan
2. David Aw HongNor X3
3. Anthony Yeo
Malaysian National Series 2015 Round 1
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.buggy-sport.info%2Findex.php%2Fgallery%2Fimage%3Fview%3Dimage%26amp%3Bformat%3Draw%26amp%3Btype%3Dimg%26amp%3Bid%3D12962&hash=1e29ef90896d1d012849c640f3c04f5ea4ee60f1)
1. Didier Perrin
2. Chopin Yusuf HongNor X3
3. Indra Liono
BORNEO 1/8 OFFROAD LEAGUE 2015 Round 1
(https://scontent-b-ams.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/p180x540/10391386_885459231493656_1522954206681605176_n.jpg?oh=1ce419a38a0394d675281f5cc39a920a&oe=5553E127)
1. Kent Sung
2. Zee HongNor X3
3. Voon HongNor X3
The Indian RC Dirt Series
(https://scontent-b-ams.xx.fbcdn.net/hphotos-xfp1/v/l/t1.0-9/1743522_248381208672287_1659874909_n.jpg?oh=c4239fc82e3a61f4c2068c429bdc785a&oe=55552979)
Pro buggy
Race 1
1. Ganesan Satish
2. Sarath Uday
3. Murail Kannadhason HongNor
Race 2
1. Ganesh Satish
2. Murali Kannadhason HongNor
3. Junichi Yawata
Amateur Buggy
Race 1
1. Rup Chander HongNor
2. Barrin HongNor
3. Sagar
Race 2
1. Rup Chander HongNor
2. Barrin HongNor
3. Guru Shankar HongNor
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.buggy-sport.info%2Findex.php%2Fgallery%2Fimage%3Fview%3Dimage%26amp%3Bformat%3Draw%26amp%3Btype%3Dimg%26amp%3Bid%3D13143&hash=0ae2287995ba47e2684723252c581e885934a6f1)
Rup Chander - Amateur Buggy National Champion 2014
Taiwan Kamioka Cup ?
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fasiarc.info%2Fdata%2Fattachment%2Fblock%2F5b%2F5b504bbfd91b8d873cb4b9985ba38386.jpg&hash=e89968ab496bb913453e37d410877fe22cc836c2)
1. Sam Chen
2. Cheng Yi Yuan (TQ) HongNor X3
第二屆神岡盃引擎越野車全國公開賽--BUGGY A MAIN FINAL (http://www.youtube.com/watch?v=_QxzOK5a7vM#ws)
Mortegliano UD, Italy.
(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10488120_903286743044238_2828021826931956002_n.jpg?oh=7ea558437851c97edd0b3bfc02853717&oe=55BE5729&__gda__=1434356803_9c5acf59b32b6aeed48973a234411baf)
Category F1
1. Alex Zanchettin
2. GABRIELE ZECCHINI HongNor
3. GIAN LUCA ZECCHINI HongNor
Category F2
1. Francesco Zanin
2. RADEK TRAWINSKI HongNor
3. Stefano Silvestrin
--------------------------------------------------------------------------------------------------------------------------------------------------
Gemona, Italy.
(https://scontent-ams.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/10917332_890849567621289_137450576874440737_n.jpg?oh=fd17bf895d2537f75ad3f4c1a7878ab9&oe=5588E9EB)
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10959470_890849647621281_4848222904663945018_n.jpg?oh=316a003519e8f2cbf6a3e5257acde476&oe=558DD29B&__gda__=1434117959_c044e5e5672ebcbcc8e5d1fa885bbdd1)
Category F1
2. Gian Luca Zecchini Hong Nor X3
Category F2
3. Radek Trawinsky Hong Nor X3
Italiassa näyttäisi olevan palkinnot kohillaan, viiniä ja torttua! :afro:
Very good result for the team Car Hobby Center at the first Race in Limassol with Nicholas Zachariades in A main the 2nd place with Hong Nor X3 Sabre
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xat1/v/t1.0-9/s720x720/11076236_910362692336643_5726097550868350698_n.jpg?oh=8f246a95e7623ed56edf4a419a37d5da&oe=55BDAF0F&__gda__=1437467507_297095e30ca1293a9a5e409b3ff9dafd)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Mortegliano - UD Tsunami Park - Off Road Mlc Trophy
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/q86/s720x720/11070376_910455065660739_1649171499960874911_n.jpg?oh=a29d4674c4145a16394f7bf7d80c0f91&oe=55B288F4&__gda__=1434361693_0b253027549d46b69e72c14ec210f953)
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/q85/s720x720/10671262_910454738994105_3856657400349950733_n.jpg?oh=35f2990b1693c58f45b00294403a1cb9&oe=557F04D5&__gda__=1434500035_5e09b2ef13053cca264dd2870b3d497a)
F1:
1. Alex Zanchettin
2. Gabriele Zecchini HongNor
3. Andrea DiCecco
F2:
1. Radek Trawinsky HongNor
2. Licio Dalla Marna
3. Riccardo Pasquetto
HNMC Winter Series Championships overall results
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2015%2F03%2FClubmans-top-20-640x480.jpg&hash=a383ab9d31f67b44a8f0556cc324de247e0be11c)
Clubman Championship Results:
1. Jamie Reeks
2. John Geaves HongNor X3
3. Chris Smoothy
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2015%2F03%2FTop-5-juniors-640x480.jpg&hash=640d547d0c7dd75dae2fcc96c400482c6e8d6b66)
Junior Buggy Championship Results:
1. Jamie Clancy
2. Harry Philips
3. Luke Garrett
4. Marques Scripps HongNor X3
WillSon Track Championship, Bali
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.buggy-sport.info%2Findex.php%2Fgallery%2Fimage%3Fview%3Dimage%26amp%3Bformat%3Draw%26amp%3Btype%3Dimg%26amp%3Bid%3D13688&hash=bed7d866f168b5d5335b325f09ad8edc6a7bc722)
1. Jason Nugroho (TQ)
2. John Agus
3. Andre Irawan HongNor X3
VP-PRO has released their latest body creation, this time designed for the HongNor X3 1/8 buggy. The body features a sleek and low-profile cab forward design that is intended to reduce body weight and maximize stability and speed. The body is made up of high quality 1.0mm clear Lexan. While VP-PRO has clearly put clever thought into the design, the same cannot be said for the name of the body as it has been given no catchy title, but instead simply labeled the 'CB-HNX3-CL' body.
http://www.vp-racing.com/productshow.asp?id=758 (http://www.vp-racing.com/productshow.asp?id=758)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.vp-racing.com%2Fsmallimg%2F201505261543431090.jpg&hash=7b3379d846707b8c5c882440ba8a0d41035ba6b6)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.vp-racing.com%2Fsmallimg%2Fxt201505261544111395.jpg&hash=21e24518c1797f15a602e1a1e64ac5febd6656e4)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.vp-racing.com%2Fsmallimg%2Fxt201505261544071227.jpg&hash=1ddd26d2cc83b5ff5201c42652d75594f953959a)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.vp-racing.com%2Fsmallimg%2Fxt201505261544031367.jpg&hash=bf48c62e0878040901ec7551b8c9a000a40740d6)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.vp-racing.com%2Fsmallimg%2Fxt201505261543561680.jpg&hash=a0858af7e5c8480071e73f5ee1545e630d943b15)
LAP PARADISE 1/8 OFF-ROAD LEAGUE 4
1. Daniel Law
2. David Aw HongNor X3
3. Youyi
Danish 1/8 Off-road Nationals 4
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2015%2F06%2FOliver-Fischer.png&hash=0ea286bf15d8604374ffefc75b76c0f5ebf3ae07)
1. Oliver Fischer
2. Tim Culmsee HongNor X3
3. Nikolai Lamberts
Cyprus RCE Championship 4
(https://scontent-arn2-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/s720x720/11219718_728450983947614_6311359974431240851_n.jpg?oh=d897673536c7fa9f9bffcd97cc4d7766&oe=56232693)
1. Nicholas Zachariades HongNor X3
2. Rafael Panayi
3. Savvas Savva
Sadepäivien ajankuluksi väkersin lämpösuojusta tankille (ollut suunnitelmissa jo pari vuotta ja myyntiinkin asti taisi tänä vuonna jo ehtiä, ainakin Mugenille).
Lexanin pala johon tein pari reikää letkunkannattimia varten (vaihdoin kannattimet joissa paikka yhdelle fuililetkulle), alumiiniteippiä tmv. ympärille ja letkut kulkemaan tankin toiselta puolelta (suodattimen jätin pois ja tilalle paineletkuun jäähdytystä. Palanen pysyy paikallaan fuililetkun palalla jonka päihin laitoin ruuvit.
Onko tuosta hyötyä? En tiedä, mutta tuskin on haittaakaan ja olipahan jotain tekemistä :grin:
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi9.aijaa.com%2Fb%2F00192%2F13880632.jpg&hash=2793ad24ffd42995f27ca8e46673db51e6d06883)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi6.aijaa.com%2Fb%2F00995%2F13880633.jpg&hash=c1b8995cf999abf44e5ad55c3f8afb6b44308c19)
Onko tietoa, myykö kukaan suomessa noita x3 honkkarin vp-pro koreja..?
Lainaus käyttäjältä: xsaara1 - 25.06.15 - klo: 21.12
Onko tietoa, myykö kukaan suomessa noita x3 honkkarin vp-pro koreja..?
Ei tietääkseni myy Suomessa. Lähin kauppa olisi Tanskassa (luulisin) josta löytyisi suoraan hyllystä. ---> http://tchobby.dk/webshop/index.php?id_product=1371&controller=product (http://tchobby.dk/webshop/index.php?id_product=1371&controller=product)
Jos joku aikoo tuota koria tilata jostain niin ilmoittakaa minullekin ennen tilausta :smiley:
Itse asiassa juurikin tuolta yritin jo kerran tilata, mutta ilmeisesti eivät lähetä ulkomaille...Ainakin tulkitsin niin, koska tilaajan osoitetietoihin tajosi vain tanskaa...Täytynee jatkaa etsintöjä jostakin muualta. Rupeaa korin osto olemaan ajankohtainen ja tuo vp-pro olis vakio koppaa ehkä hieman linjakkaampi...
Lainaus käyttäjältä: xsaara1 - 25.06.15 - klo: 22.35
Itse asiassa juurikin tuolta yritin jo kerran tilata, mutta ilmeisesti eivät lähetä ulkomaille...Ainakin tulkitsin niin, koska tilaajan osoitetietoihin tajosi vain tanskaa...Täytynee jatkaa etsintöjä jostakin muualta. Rupeaa korin osto olemaan ajankohtainen ja tuo vp-pro olis vakio koppaa ehkä hieman linjakkaampi...
*EDIT*
Tim Culmsee vastasi Tchobbysta kori kysymykseen. Voisivat lähettää koreja Suomeen. Aivan tarkkaa hintaa en osaa vielä sanoa mutta kappale hinta olisi noin 35€ + postikulut kotimaahan. Olisiko muita kiinnostuneita ostamaan VP-PRO Raptor koria?
Nyt kun vielä ilmoittauu pari VP-PRO korin haluavaa niin tilaus on mahdollista tehdä :smiley:
Hinta:
noin 35€/kpl + postit suomessa, jos kori maksaa alle tuon 35€, erotus maksetaan takaisin tai vähennetään posteista, eli rahallisesti tästä ei ole hyötymässä kukaan. :smiley:
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.vp-racing.com%2Fsmallimg%2F201505261543431090.jpg&hash=7b3379d846707b8c5c882440ba8a0d41035ba6b6)
joo on se makee kori... (Edited)
Rallycross Regional in Portgual
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2015%2F06%2FIMG_0090.jpg&hash=d9acc601bdb5ada0b0fdcca85805a51fe75e826f)
1. Pedro Henriques
2. Helder Barros
3. Joel Mendonca HongNor X3
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Fun Race 2015 Jakarta Indonesia
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.buggy-sport.info%2Findex.php%2Fgallery%2Fimage%3Fview%3Dimage%26amp%3Bformat%3Draw%26amp%3Btype%3Dorig%26amp%3Bid%3D14043&hash=12e67d95a239e4da6873e4a490386d8b82cc0ee3)
1. Yoyo Agus Anggoro ( TQ )
2. Chopin Yusuf HongNor X3
3. Andre Supriyanata
T-Work's
7075-T6 Hard Coated Steering Ball 4pcs. TO-184
T-Work's have introduced this line of steering balls suitable for the Hong Nor/OFNA X3 1/8th scale buggy. Sold in a set of 4 they have been machined from lightweight 7075-T6 Hard Coated aluminium and are a direct replacement for the kit part.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fcdn.shopify.com%2Fs%2Ffiles%2F1%2F0544%2F1237%2Fproducts%2FTO-184a_1024x1024.jpg%3Fv%3D1438913501&hash=028914735547c0f81634d90ca93e7982edea2d6d)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fcdn.shopify.com%2Fs%2Ffiles%2F1%2F0544%2F1237%2Fproducts%2FTO-184_1024x1024.jpg%3Fv%3D1438913502&hash=ad68a028b4382f41f49ba07014c61afb6cfdfba3)
Nyt pitkästä aikaa sain jotain autosta hajoamaankin. Takaiskarin varsi oli vähän vääntynyt ja siiven "prikka" (wing buton) korkkasi, tosin vähän omaa syytä kun liian syvään olin ruuvit survonut.
Eli edelleenkin kestävä auto mielestäni ollut ja vaikka maailman luokan huippukuskeja ei merkillä pahemmin ajakaan (=markkinoi) niin olen ollut hankintaani tyytyväinen :smiley:
Mikähän ton honkkarin tilanne on ku meni konkkaan/omistaja vaihtui ? Osia vähä vaikee saada..
Jos olen oikein ymmärtänyt niin jenkeissä olisi kai vähän hankaluuksia osien saannilla tällä hetkellä mutta omalta kohdalta en ole huomannut eroa entiseen.
Omistaja vaihtui (entisellä omistajalla kai terveysongelmia) ja uusi omistaja jatkaa käsittääkseni entiseen malliin mutta tarkkaa tietoa toki ei ole kun olen vain perusharrastaja. Maahantuojalla ym. yhteyksiä omaavilla tahoilla on varmasti parempaa tietoa asiasta.
Moikka.
Kait mä kauppiaana ja maahantuojana voisin hiukan avata kun sain selkoa asiaan perjantaina.
Keväällä sain tiedon että HN ajaa varastoja alas, jotta saavat myytyä tuotannon uudelle yrittäjälle.
Tästä ei tosiaan mitään puhuttu ennakkoon, lähinnä selvisi ajan ja usean kyselyn myötä.
Tosiaan Honkkarin omistajalla on ollut pitkään terveyshuolia, eikä hän ole kyennyt hoitamaan hommiaan.
Tästä syystä X3 truggy ei ole vieläkään tullut, vaikkakin siitä on jo vuoden-pari ollut puhetta.
Kaupat tehtiin kuulemma jo Toukokuussa, mutta tehtaan ylösajo kesti melko kauan.
Siellä oli aiemmat työntekijät tehneet jäyniä uudelle firmalle varastoimalla viallisia tuotteita ehjien seassa, siitä syystä kaikki varastot oli pitänyt käydä läpi tuote kerrallaan. Tämä tietty on vienyt paljosti aikaa, mutta nyt on meilläkin ensimmäinen tilaus lähetysvalmiina tehtaalla. Pitäisi jo ensi viikolla lähteä kohti Suomea.
Muutoksia ei pitänyt tulla ollenkaan, mutta annas olla tulihan niitä kun tilaustamme käsiteltiin...
Honkkarin vanhemmat mallit SCRT10, CRT.5, NEXX10SC, X1, X1X, DM-One ja X2 sarjojen valmistus on lopetettu, tälle en syytä saanut vaikka muutaman kerran kysyin. X3 tulee siis jatkumaan normaalisti.
Nyt oli jo X3 RTR saanut ensimmäiset muutokset ja hinnasto tehtaalta on voimassa vain tämän vuoden loppuun, ensivuonna tulee kuulemma kaikista 2016 mallit. Saas nähdä mitä muutoksia tulee, ainakin ohjausgeometriaan saisi muutoksia tulla. :)
Tilasin kattavasti osia myös vanhempiin malleihin mitä sain, osa kamoista heillä oli vielä varastossa ja koitan niitä vielä täydentää tarpeen vaatiessa. Eri osanumeroita oli tilauksessa noin 200 ja toimittamatta jää noin 15 osanumeroa. Aikas paljon heillä siis varastossa vieläkin tavaraa on. Tulen ottamaan lisää puuttuvia osia niin kauan kuin niitä vain tehtaalta saan, joten varaosia on vielä ainakin saatavilla. Seuraavassa tilauksessa näkee miten tehtaalla homma toimii, tämä ensimmäinen oli odotetusti hidas, mutta toivottavasti seuraava tilaus on nopeampi.
Näillä tiedoilla mennään sitten eteenpäin.
Terkuin
Jarno
Loistavaa Jarno!
Tää on hyvä tieto ettei tarvii rupee x1/dm1 diffejä ja vetorattaita ja x2 nivelvetareita rupee tilailee rapakon takaa.
Pistä infoo kun osia olis tilattavissa. Vaihteistohan x3:ssa on sama ku dm1:ssä.
Kiitti!
Juu, varsin kiva homma, että osien saanti ei lopu, koska kalustona tällä hetkellä: honkkarin X1,X2 ja X3... :azn:
Koita Jarno saada 45T X3 GT spurreja OFN35245/294E sieltä tehtaalta! Ja 18T kakkosen pinjonia...
Jos jollain on OFN35245 niin YV olis kiva yllätys :)
Lawrence Cup 1/8 Off-Road Race
1. Ben Panic
2. BH Gan
3. David Wong HongNor X3
Malaysia Regional Championship Grand Final 2015
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.neobuggy.net%2Fwp-content%2Fuploads%2F2015%2F11%2FPodium-A-Main-640x360.jpg&hash=2f43fc04bace8596e946ef6c983ac0030b103f26)
1. Didier Perrin
2. David Aw HongNor X3
3. Terrence Lim
Uudet RTR versiot tulossa, nitro ja sähkö. Parannusta taitaa olla joittenkin osien suhteen edellisiin RTR autoihin verrattuna eli alkaisi kai olla lähempänä nykyistä pro versiota. ...Päivitettyä kit versiota/osia odotellessa.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fnews%2Fpics%2Fbig_201512233145626.jpg&hash=22c8cd99de82f65e10181be43b214c38c6a1bf59)
Nyt kun muutaman kuukauden tullut oltua aika lailla ulkona rc-touhuista niin nyt vasta huomasin, että tuollainen taitaa olla tuloillaan. Tarkempaa tietoa muutoksista kuin, että hiilari iskaritornit ja sinistä blingiä mettereissa, iskareissa, ackerman, moottoripukit ym. pienissä nippeleissä. Eli ei oikeita uudistuksia kai ole tulossa, päivitystä ainoastaan hiilari iskaritornit, muilta osin taitaa olla RTR-version osat kyseessä.
Sähköversiossa keskidiffin hiilaripalikan muoto muuttunut.
X3B Super Sabre
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fsubject%2Fpics%2Fsubject_20164133164933.jpg&hash=7c58f6b8e3e7e74633791e66d41e0568d742dbfb)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fproduct%2Fpics%2Fpdt_big_20164144161429.jpg&hash=db0dd8b77fa94f94569ce6e38f69958c93d67a37)
80% PRE-ASSEMBLED KIT.
FRONT & REAR HEAVY DUTY UNIVERSAL SWING AXLE (CVD).
EXTRA THICK CARBON-GRAPHITE FRONT AND REAR SHOCK TOWERS.
RELIABILITY AND PERFORMANCE 16MM V2 HARD COATED SHOCKS.
NYLON REAR SKID PLATE.
3mm 6061 T6 ALUMINIUM HARD COATED CHASSIS WITH FRONT AND REAR KICK-UP.
FRONT KING PIN HUB TYPE SUSPENSION.
ONE PIECE SERVO RECIEVER AND BATTERY TRAY.
METAL PLATE PADS & FIBRE DISC ROTORS.
SIDE LOADED BRAKE CALIPERS FOR BETTER CENTER OF GRAVITY.
LONG SUSPENSION FRONT AND REAR ARMS WITH DROOP SCREWS.
3 PIECE TEFLON CLUTCH SHOE SYSTEM.
125CC FUEL TANK WITH OPEN CAPACITY PLUG.
INTEGRATED FUEL TANK CLIPS FOR EASY MOUNTING OF FUEL LINES.
FULLY METAL ADJUSTABLE TURNBUCKLES FOR STEERING AND CAMBER.
3 SETS OIL FILLED DIFERENTIALS,FORNT,REAR AND CENTER.
FORGED STEEL DIFFERENTIALS BEVEL AND PINION GEAR.
HIGH CAPACITY AIR FILTER.
ALUMINIUM LOW GRAVITY ENGINE MOUNT.
REAR MUD GUARD AND NARROW CHASSIS STONE GUARDS.
ALUMINUM HINGE PIN HOLDER WITH INSERTS.
LIGHT-WEIGHT INCH-UP WHEELS WITH HIGHT GRIP DELTA PIN TIRES.
EFFICIENT DRIVETRAIN ON STEEL FULL SEALED BEARINGS.
LOW LYING CAB FORWARD PC BODY WITH THE BIG VAST.
DOWNFORCE WING TO MAKE THE CAR BODY MORE STABLE WHEN JUMPING UP AND DOWN.
DIFFERENTIAL PINION GEAR STEEL SCROLL TYPE MAKES THE GEAR MORE SMOOTH AND DURABLE.
NEW CASTER BLOCK DESIGN MAKE LARGER STEERING ANGLE.
FRONT & REAR BRACE MAKES THE CHASSIS RIGIDITY MORE STABLE.
SUPER STRENGTH NYLON RESIN PLASTIC METERIAL.
OVERALL LIGHT-WEIGHT BUGGY WEIGHING IN JUST UNDER 8LBS.
Tuommoinen uutinen oli honkkarin sivuilla. Toivottavasti omistajan vaihdoksesta ym. johtunut "seisahdus" on takana ja merkki palaa normaaliin rytmiin ja autojen kehitykseen.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fnews%2Fpics%2Fbig_20164155172121.jpg&hash=d1ac3c95891c462a26cf2b54ec9b9b70ff757660)
2016 IFMAR 1/8 Nitro Offroad World Championship will be hold in Las Vegas at October.
And we would like to announce that "HONG NOR" will return to the battlefield. From the warm up match of IFMAR at May, Taiwan HONG NOR Team is all get ready to provide the completely supports to all the HONG NOR Racing fans and racing drivers. If you will attend 2016 IFMAR and if you need any assistance, please contact with us right now. We'll fully support at what you need!
Thank you so much for your always support!
Vauhtipyörän ja hiilikuituisten iskaritornien kuvat ja osanumerot:
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fproduct%2Fpics%2Fpdt_big_20164203155046.jpg&hash=fcb85a3a63f443f21d76c4d6ec29169e6f92311b)
Carbon 4.5mm Front Shock Tower #X3.6-01
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fproduct%2Fpics%2Fpdt_big_20164203155338.jpg&hash=31ac8aebdfc248c607eb4bfbb5c19340e74411e6)
Carbon 4.5mm Rear Shock Tower #X3.6-02
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fproduct%2Fpics%2Fpdt_big_2016420315560.jpg&hash=1a56acf9c570eb494b73368a073419d0d38d4b53)
33.5mm 3 Pin Flywheel #X3.6-10
...Eli jos en muista väärin niin taitaa olla halkaisijaltaan 0.5mm suurempi kuin edellinen kullan värinen versio.
Eivät nämä mega uusi juttu ole mutta laitetaan kuitenkin. Eli jos joku haluaa bling blingiä autoon tai muuten erottua niin esim. T-Work's valmistaa kullan värisiä settejä (DIN 10.9) monelle merkille ja voi myös vaikka vain yhtä kokoa hankkia.
GSS-X3 Gold Plated Steel Screw Set 100pcs. (For Hong Nor X3)
(https://cdn.shopify.com/s/files/1/0544/1237/products/LONG_M4_large.jpg?v=1464244733)
Honkkarilta uutta versiota tulossa eli HongNor X3 Sabre 3.0 EVO.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fsubject%2Fpics%2Fsubject_20161018285324.jpg&hash=c2b41a56fe39cf5f29dcc64bf6fd0388391d4e40)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fabload.de%2Fimg%2F14657266_1344539738896yy21.jpg&hash=bd357434ead17f9d14e9e78781219b5e6e4553a9)
(https://abload.de/img/14717315_1344539762233bzlc.jpg)
(https://abload.de/img/14370173_132263627108glah4.jpg)
(https://abload.de/img/14433145_1322636231082lynl.jpg)
HongNor X3 Sabre 3.0 Evo
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fsubject%2Fpics%2Fsubject_201611233152541.jpg&hash=bdffe0a2cb39dc9177b4e88e3758cc097fe8145d)
LIGHT WEIGHT FRONT, REAR AND CENTER DIFFERENTIALS
COMPLETE SET OF LIGHT WEIGHT OUT DRIVES
7075 CNC 5MM ALUMINIUM FRONT AND REAR SHOCK TOWERS
FULL TRAVEL FRONT AND REAR SUSPENSION
REDESIGN STEERING SYSTEM WITH ACKERMAN
SOILD CONSTRUCTED ARMS AND CAMBER LINKS
STEEL CATURED HINGE PINS
7075 CNC ARM HOLDER AND TOE PLATE
7075 CNC FRONT REAR CHASSIS BRACES
7075 3MM LIGHTENED CHASSIS WITH COUNTERSUNK SCREWS
7075 CNC ETCHED LEFT AND RIGHT LONG ENGINE MOUNT
VERSION 2 BIG BORE SHOCKS
COMPOSITE RADIO TRAY, ENCLOSED BATTERY AND RECEIVER BOX
2 ANTI-CLOCKWISE SCREWS FOR FRONT AND REAR SHOCKS
FULL LIGHT WEIGHT CVA DRIVETRAIN
SPECIAL CAPPED CENTER DRIVELINE
SMALL FRONT AND REAR GEAR CASE WITH SWAY BAR MOUNT
ADJUSTABLE TURNBUCKLES AND LIGHTENED CAMBER LINKS
COMPLETE HIGH PERFORMANCE BEARING SET
FRONT AND REAR CHASSIS KICK UP (PATENTED)
COMPOSITE STONE GUARDS AND REAR MUD DEFLECTORS
CENTER DIFFERENTIAL WITH BRAKE AND GEAR SHROUD
LIGHT WEIGHT FRONT AND REAR FIBER BRAKS
SIDE LOADED CALIPER WITH RETURN SPRINGS
LIGHT WEIGHT FLYWHEEL AND SPECIAL MIXTURE ALUMINIUM 3 SHOES CLUTCH
CLEAR CAB FORWARD BODY FOR EXCELLENT HANDLING
125CC FUEL TANK AND REMOVABLE TANK PLUG
INTEGRATED FUEL CLIPS (PATENTED) AND FUEL FILTER
HIGH IMPACT DOWN FORCE WING
HARD CHROME EFRA APPROVED 2080 PIPE AND HEADER
LIGHT WEIGHT INUP WHEELS WITH TIRES
CARBON FIBER DIFF PLATE
ALUMINUM REAR BRACE MOUNT
ENGINE BACKWARD FOR BETTER STABILITY
FRONT / REAR CHASSIS RESERVATION SPACE FOR COUNTER WEIGHT AT FRONT / REAR CHASSIS
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317437_2.jpg&hash=e1fe9418c961d9549ebcb019f03edacea367a65d)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317437_3.jpg&hash=44c813cdd875a5341090b583352f8707f1a368e1)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317437_4.jpg&hash=4abaed8e8d1b6e74ea3dcd153084d7f95111ef2a)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317437_5.jpg&hash=238f82869733e9477950df745ae04076efb74de1)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317723_1.jpg&hash=195493122000f69164c8e5628bc3b7a3624de4c3)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317723_2.jpg&hash=e7f76d82d8b1960972904278055a4b4487a68166)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317723_3.jpg&hash=11447ef98a294db22dbdca63a7c3d1873cfb3063)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317723_4.jpg&hash=a8a55665e1d6d9a0ce4efe0eaae007858c94d396)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317723_5.jpg&hash=4f6c7f267db4a39947e3133d90cdbe4683cbacdd)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317911_2.jpg&hash=098abe041d9af77bf4a4d59ee2d59bed3dda3004)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317911_3.jpg&hash=7efb9bd81de38057255f4d0b3836a4e2c187af43)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317437_1.jpg&hash=9dfb0eeb3f4f488cd8b29ddf99371f2455d3f469)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317911_4.jpg&hash=bc08b1a8ff6bde6a0d9842b9b379753b90819097)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Falbum%2Fpics%2Fbig_20161123317911_5.jpg&hash=41b582559eac1b7b25dc3bad44b708c3dd760ceb)
Päivitysosat kitin tuotenumero #X3S-28
(https://scontent.fqlf1-1.fna.fbcdn.net/v/t1.0-9/15578942_1323891990983709_4900360590009228783_n.jpg?oh=5aff8b1191151e452a967a080e697259&oe=58ECF71C)
Tänään posti toi päivitysosat.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi9.aijaa.com%2Ft%2F00016%2F14309511.t.jpg&hash=5f4fd0b7ace083d0bc8c4869fe0516dc22723edd) (http://aijaa.com/vtIc90)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi3.aijaa.com%2Ft%2F00261%2F14309512.t.jpg&hash=08894c44c9aef20e097a043d118fa82376c7b136) (http://aijaa.com/ssHoIY)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi4.aijaa.com%2Fm%2F00333%2F14329832.jpg&hash=1505159fd7dec4e6a7e403a35cf4790e25913e78) (http://aijaa.com/xCXbcc)
Tuosta pohjalevyjen eroavaisuuksia.
Evossa keskidiffi on käännetty, moottori on vähän taempana ja takaosan kick-upista on luovuttu ym..
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi7.aijaa.com%2Fm%2F00529%2F14329834.jpg&hash=b061076b45a8c632aa0175df6e53a627518af3ab) (http://aijaa.com/fCg9mI)
Upgrade kitin mukana ei tule jostain syystä pidempiä takatukivarren tappeja jotka ostin erikseen #X3.6-07
Uusien mitat 4x67.6mm
3.0 EVO infovideo, kiinaksi.
! No longer available (http://www.youtube.com/watch?v=cVM9BvkB7cs#)
X3 Sabre 3.0 EVO manuaali, linkki suoraan lataukseen.
http://www.hongnor-racing.com/program/files3/download.asp?sn=584 (http://www.hongnor-racing.com/program/files3/download.asp?sn=584)
Jos linkki ei tahdo aueta, nimeä uudelleen päätteellä .PDF
X3 pro 2.0 upgrade EVO 3.0 manuaali löytyy tuolta.
http://www.hongnor-racing.com/program/files3/download.asp?sn=587 (http://www.hongnor-racing.com/program/files3/download.asp?sn=587)
Ja nyt vasta tämänkin laittelen, eli lisäpainoja eteen ja taakse. #X3S-29 ja #X3S-30
(https://scontent.fqlf1-1.fna.fbcdn.net/v/t1.0-9/15965915_726723794169391_5533574659157142731_n.jpg?oh=54a4171fcc11ad5874d2f1005ee8d0db&oe=596E48B9)
(https://scontent.fqlf1-1.fna.fbcdn.net/v/t1.0-9/15940569_726724914169279_8450581911169175218_n.jpg?oh=c0c152648fbf6e3841545be74c648148&oe=59705819)
(https://scontent.fqlf1-1.fna.fbcdn.net/v/t1.0-9/15895197_726724934169277_1709086063214753561_n.jpg?oh=bd72eb19fd5ae93ce60b208db9b0ebe1&oe=592955B3)
T-Work'siltä tällaista uutta, käy kaikkiin X3 autoihin.
TO-213-X3 Graphite Upper Plate
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi.ebayimg.com%2Fimages%2Fg%2Fk0AAAOSwSlBYuRJO%2Fs-l1600.jpg&hash=4be2625e4c0d5d8561acb70da3e8e27abfc72450)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi.ebayimg.com%2Fimages%2Fg%2Fo20AAOSwB-1YuRJT%2Fs-l1600.jpg&hash=86c68cb3b936f02888db2a615f9d3d62f6c530a4)
Tuossa nyt virallisestikin ilmoitus uusituista pidemmistä tapeista jotka oli saatavilla jo 2.5kk sitten.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fnews%2Fpics%2Fbig_20174182154756.jpg&hash=9e01c4439c7ea6514c4663e8655eeb99a4143e5b)
2017/4/18
**New Product Release Information**
X3.6-07 4x67.6mm Arms Shaft
Product instructions :
Comparing to original one, this part is 1.6mm longer in length. It could help shaft to be more stable and narrow down gap while assembling.
This part fits the following vehicles :
X3 EVO、X3GT
Tuommoinen rykäisy kilikali maaleilla X3 3.0 Evo koriin.
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi4.aijaa.com%2Ft%2F00368%2F14390456.t.jpg&hash=101e252f385d61cc5765a08646e75aa3a2d19a69) (http://aijaa.com/UKuOLc)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi7.aijaa.com%2Ft%2F00237%2F14390464.t.jpg&hash=b9a2cd4bfa5dbf34853a7478fb2ce5540cd24018) (http://aijaa.com/vR0z7W)
Noniin, ensimmäiset tankilliset 3.0 Evo päivityksellä ajeltu. Päivitysosia lukuunottamatta mitään säätöjä en ole vielä tehnyt enkä voi muiden puolesta puhua mutta omalla kokemuksella auto käyttäytyy jo nyt paljon paremmin ja kääntyvyys on ihan toista luokkaa kuin 1.0 tai 2.0 versioissa. Toki autoa testattu vasta turffilla mutta varmasti parannus näkyy sitten saviradallakin. Tästä on hyvä lähteä taas harrastelemaan. :smiley:
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fi6.aijaa.com%2Ft%2F00693%2F14398308.t.jpg&hash=3d67a54d6b11400fe033a9b742027257641688ba) (http://aijaa.com/wAzOrK)
ois x3 sabre rtr 28 vetostartil niin jos tekis sähköversion
pitääkö pohjalevykin vaihtaa et aika tyyris toi
konversio kitti on mut jos onnistuu ilman pohjalevyn vaihtoo ni
kertokaa ihmees.
Ehkä tee se itse tyylillä saa sähköksi muutettua mutta helpommalla ja ehkä jopa halvemmalla pääsee kun ostaa muutossarjan.
Tai sitten hankkii suoraan uuden mallin, 3XS EVOe.
http://www.hongnor-racing.com/pdt_view_cars.asp?sn=1218 (http://www.hongnor-racing.com/pdt_view_cars.asp?sn=1218)
(https://hm-lab-x.fi/proxy.php?request=http%3A%2F%2Fwww.hongnor-racing.com%2Fprogram%2Fproduct%2Fpics%2Fpdt_big_20196241143751.JPG&hash=4d27694caca8ed6b9e2362e03dd41e64e89b1fd6)